Products

Provides a 56k/64k DDS network interface for NetVanta 1000, 3000, and 4000 Series of access routers. Network Interface Module (NIM) Features: 56k/64k Network Interface Module for NetVanta 1000, 3000, 4000, and 7000 Series of access routers Provides DDS network interface Returns: Due to the...

Plug-on module for the NetVanta NIM, providing analog dial backup and for remote dial-up management. Features: Plug-on form factor attaches to any NetVanta Series NIM Provides analog network restoral up to 33.6 kbps This module may also be used for dial-in access to NetVanta...

Plug-on module for the NetVanta NIMs, providing ISDN BRI dial backup with U interface. Features: Plug-on form factor attaches to any NetVanta Series NIM Provides ISDN 64 kbps network restoral ISDN BRI U-Interface

V.35 Serial Interface Cable For use with 1200866L1 Serial nim. For connection to an External DSU/CSU. Returns: Due to the specialized nature of this product and manufacturer requirements, this product is not returnable.

DIM Carrier Module is a module to support a Dial Backup Interface Module (DIM) without the use of a NIM. Returns: Due to the specialized nature of this product and manufacturer requirements, this product is not returnable.

HSSI Cable connects the HSSI Wide Module to a DTE. Returns: Due to the specialized nature of this product and manufacturer requirements, this product is not returnable.

NetVanta HSSI Wide Module supports synchronous operations up to 44.2 Mbps. Features: SCSI-II 50-pin female connector

The ISDN Service Unit is a full-featured singleport terminal adapter that allows cost-effective high-speed data transmission at rates up to 128 kbps. Additionally, the ISU 128 allows the user to migrate existing networks to an ISDN environment. Features: Provides up to 128 kbps of...

Rackmount module for Smart 16/16e shelves. Features: Supports conversion for signal framing and line coding (ESF to D4, B8ZS to AMI) Transparently passes PRI T1 line conditioning and jitter tolerance per ANSI T1.403, T1.102, and AT&T TR 62411 Enhanced alarm status, T1 performance reports,...

The ADTRAN T3SU 300 is a T3 DSU/CSU capable of providing users up to four DTE data ports. This multiport DSU/CSU provides access to non-channelized T3 services and allows users to share the cost of a T3 line between multiple applications. Adtran T3SU 300...

The ADTRAN TSU ACE is a low cost, full featured T1/FT1 Data Service/ Channel Service Unit (DSU/CSU). The TSU ACE provides an interface between T1 or Fractional T1 service and the end user's Data Terminal Equipment (DTE) for applications such as LAN-to-LAN bridging, Frame...

NetVanta Octal T1/E1 Wide Module provides eight T1 or E1 interfaces via eight RJ-48 connectors. Octal T1/E1 Wide Module Features: Software selectable between T1 and E1 Includes eight RJ-48 to RJ-48 cables Supports NxT1 connections with MLPPP Supports 8 separate T1/E1 connections of Frame...

Provides a network interface for a fractional or full T1 for the NetVanta 1000, 3000, and 4000 Series of access routers. Network Interface Module (NIM) Features: T1/FT1 Network Interface Module (NIM) for NetVanta 1000, 3000, 4000, and 7000 Series of access routers Provides T1/FT1...

T1/FT1 + DSX-1 Network Interface Module (NIM) for NetVanta 1000, 3000, and 4000 Series of access routers. Network Interface Module (NIM) Features: Terminates a full or fractional T1 DSX-1 interface supports TDM voice traffic to a PBX Integral DSU/CSU Remotely configurable Returns: Due to...

Provides branch office IP routing applications over PPP or ATM networks, also supports ADSL over POTS (Annex A), as well as ADSL2 and ADSL2+ at rates up to 25 Mbps. ADSL Network Interface Module Features: Supports ADSL over POTS (Annex A) Supports ADSL, ADSL2,...

NetVanta 3305 is an access router designed for cost-effective Internet access, corporate Frame Relay, point-to-point connectivity, and Virtual Private Networking (VPN) for applications requiring bandwidth from 56k to three-T1s. Residing in a 1U, rackmountable metal chassis, the NetVanta 3305 is a single platform that...

Stand-alone T1 DSU/CSU with single V.35 interface. Stand Alone T1 Features: Single port T1/FT1 DSU/CSU Single V.35 DTE interface for applications such as LAN-to-LAN bridging, Frame Relay circuit termination, and dedicated videoconferencing Synchronous DTE rates in increments of 56 kbps or 64 kbps up...

TSU and DSU IV ESP, and IQ ethernet module. Module Features: Modular 10Base-T Ethernet interface Provides access to embedded SNMP agent in DSU IV ESP and TSU ESP Returns: Due to the specialized nature of this product and manufacturer requirements, this product is not...

A DSU IV ESP all-rate DSU/CSU with embedded SNMP. features: Synchronous loop and DTE rates from 2.4 Kbps to 57.6 Kbps Asynchronous DTE rates from 2.4 Kbps to 57.6 Kbps Automatic rate adaption Point-to-point, point-to-multipoint or frame relay EIA-232 and V.35 DTE interfaces SLIP/PPP...

The T1 ESF CSU ACE serves as a demarcation point between network T1 and customer T1 equipment. Features: Supports conversion for signal framing and line coding (ESF to D4, B8ZS to AMI) Transparently passes PRI T1 line conditioning and jitter tolerance per ANSI T1.403,...