Panduit® Cable Routing Systems

6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary. FiberRunner Coupler Features: RoHS compliant Material: ABS System Size: 6x4 CE Marking:...

Spill-Over Junction with 2x2 Exit allows for safe transition from horizontal to vertical runs. Transition to channel, slotted channel, and corrugated loom tubing. Junction Features: 2" Bend Radius Control Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channel, spilling over the side into a...

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Bracket Features: Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder...

Fiber Duct Fittings. Attaches to channel to create a horizontal four way cross intersection. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with Panduit® NR2WH-L or NR4BL-L snap rivets

Fiber Duct Fitting attaches to channel to create a horizontal four way cross intersection. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with Panduit® NR2WH-L or NR4BL-L snap rivets

Inside Vertical Right Angle Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90 deg. angle fitting FOVRA2X2YL or FOVRA4X4YL to change level of straight horizontal runs. Cover included. Features: Fittings include 5/16" assembly...

Fiber Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90 deg. angle fitting FIVRA2X2YL or FIVRA4X4YL to change level of straight horizontal runs. Cover included. Downward Angle Duct Fitting Features: Fittings include...

Fiber Duct System Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2YL or FIVRA4X4YL to change level of straight horizontal runs. Cover included. Features: Fittings include 5/16" assembly holes for...

4x4 FiberRunner Channel. The FiberRunner 4x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipment racks within a telecommunications room or service provider facility. Features: Robust...

The FiberRunner® 2x2 Horizontal Right-Angle Fitting attaches to a channel to create a 90° horizontal turn from a straight horizontal run. The cover is included. Lead time is 4-6 weeks.

Attaches to channel to create a 90 deg. horizontal turn from a straight horizontal run. Cover included. Fiber Duct System Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with Panduit® NR2WH-L or NR4BL-L snap rivets 90 degree angle

The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. Features: Minimum 2" bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split covers snap...

The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. Features: Minimum 2" bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split covers snap...

The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipment racks within a telecommunications room or service provider facility. Hinged Cover Features: Robust, large...

Attaches to 6x4 channel and/or fittings to create a 45 deg. downward angle from a straight horizontal run. Used with inside vertical 45 deg. angle fitting FRIV456X4YL to change level of a straight horizontal run. Accepts optional split cover FROV45SC6YL. Features: Minimum 2 inch...

Attaches to 4x4 channel and/or fitting to create a 90 deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC4YL. Features: Minimum 2 bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split...

Attaches to 6x4 channel and/or fittings to create a 90deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC6YL. Features: Minimum 2" bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split covers...

Attaches to channel to create a 90° horizontal branch from a straight horizontal run. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with PANDUIT NR2WH-L or NR4BL-L snap rivets

Attaches to channel to create a 90 deg. horizontal branch from a straight horizontal run. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with Panduit® NR2WH-L or NR4BL-L snap rivets

Type G - slotted wall wiring duct. Wide finger, slotted wiring duct. Cover Sold Separately: Model # C1LG6 G4X5LG6 Features: Made of rigid PVC UL flammability rating: V-0 Provided with standard mounting holes Wide finger design provides greater rigidity and larger slot width Panduit®...