Products

LANmark-5e FTP Riser cables are designed for horizontal applications in a structured cabling network to connect between the user outlet and the horizontal cross-connect. They are ideal for general installations that may be subjected to higher than normal external electromagnetic noise sources. Comes in...

Berk-Tek's Category 5e 25 pair UTP Cables are designed for use in data and voice backbone applications and are ideal for Category 5e zone cabling applications and interconnect cable assemblies. Features: 24 AWG bare copper wire insulated with FEP (plenum) Two layer core construction...

Berk-Tek's Hyper Plus 5e OSP (Outside Plant) Standard Category 5e UTP cables are designed for outside applications, either aerial or buried in conduit or duct, where building to building interconnections must be made. Features: Supports most data and voice applications Meets ANSI/ICEA 5-56-434 Standard...

Bare copper wire insulated with FEP. Two insulated conductors twisted together to form a pair and four such pairs cabled to form the basic unit made round with 3 monofilaments and with a striated flame-retardant PVC jacket. Features: New flexible, round, compact design Alien...

Bare copper wire insulated with polyethylene and cellular polyethylene. Two insulated conductors twisted together to form a pair and four such pairs cabled to form the basic unit made round with 3 monofilaments and with a striated flame-retardant PVC jacket. Features: New flexible, round,...

Berk-Tek's loose tube cable design can be used in all typical campus and outdoor/indoor installations, and is available with standard multimode, single-mode and GIGAlite fibers. This design affords the installer the ability to place cable anywhere in a network, bypassing the traditional transition points...

Berk-Tek's tight buffered, fiber optic cable is designed for installation in plenum, riser and horizontal environments and inter-building backbone structures.Cable has 900 µm buffered fibers surrounded by aramid yarns. Sheathed using a special, state-of-the-art polymer material. Features: Flexible, small diameter, 900 µm tight buffered...

Adjustable Rigging Beam Kit allows for user adjustment of the splay angle between the cabinets from 0 degrees "œTight Pack" to 30 degrees of splay. 109-2140 Features: Zero-degree tight pack to 30-degree splay Includes all necessary hardware For use with Bogen AMT-12 and AMT-15...

Mounting Base for Bogen 15-Watt Horn Loudspeaker. Compatible with: Bogen 15-Watt Horn Loudspeaker with Rotary Selector Switch Model # SPT15A

18 Gauge Connector kit that is compatible with the Intercom Desktop Control Centers (models SI35A and PI35A). Dimensions:5/8" W x 1/4" H x 3/4" D (30 pieces). Note:Insertion Tool (model TL156) required

20 Gauge Connector kit that is compatible with the Intercom Desktop Control Centers (models SI35A and PI35A). Dimensions:5/8" W x 1/4" H x 3/4" D. Note:Insertion Tool (model TL156) required

22 Gauge Connector kit that is compatible with the Intercom Desktop Control Centers (models SI35A and PI35A). Features: Dimensions:5/8" W x 1/4" H x 3/4" D Note: Insertion Tool (model TL156) required Comes in a pack of 30

Luezircs/EZ Install Ceiling Speaker 408185981. Specifications: Product Type: Speaker Minimum Frequency Response: 125 Hz Maximum Frequency Response: 15 kHz RMS Output Power: 4 W Diameter: 9.5" Height: 3" Material: ABS Plastic Sensitivity: 90 dB Also known as Bogen 5330-201

Hardware Kit for the CS1EZ

LU100WAMP 100 Watt Paging Amplifier

Paging UTI1 With Rack

High-Output Long-Throw Loudspeaker features NEAR's unique technologies to produce the highest sound quality in the most durable and reliable loudspeakers available. The A12 is a compact, high-powered speaker that projects well in open spaces like theme parks, sports fields, and plazas. Ships in 2...

N.E.A.R. A2 100 Watt / 8 Ohm, All-Weather Speaker is engineered for both indoor and outdoor applications. It is designed to fit in smaller spaces. Features: Coaxial capability 6" metal alloy hard anodized woofer 1/2" polycarbonate tweeter Metal-alloy MDT (Metal Diaphragm Technology) Mid/bass speaker...

N.E.A.R. A2 16 Watt / 70 Volt, All-Weather Speaker is engineered for both indoor and outdoor applications. It is designed to fit in smaller spaces.  Ships in 2-3 weeks. Features: Coaxial capability 6" metal alloy hard anodized woofer 1/2" polycarbonate tweeter Metal-alloy MDT (Metal...

N.E.A.R. A6 150 Watt / 8 Ohm, All-Weather Speaker is a conveniently sized 2-way, high-power speaker. Ships in 2 weeks. Features: 2-way speaker system 6" metal alloy hard anodized woofer 1" pure titanium low diffraction inverted tweeter Indoor and outdoor all-weather speaker with fully-sealed...