Cable Supports, Clips, Clamps

The Speed Link Wire Cutters makes installation of Speed Link cables quick and easy.

Easily protect your air duct corners with this Air Duct Corner Protector. (Box of 10)

For use with Speed Link Systems. (Box of 100)

The SPEED LINK LD universal support system can quickly suspend static loads, even at an angle. It is a cost-effective alternative to jack chain, threaded rod, and associated hardware in lighting and other installation projects. Features: Cable Clip 12-14 mm (0.468" - 0.562" MC/AC...

The SPEED LINK LD universal support system can quickly suspend static loads, even at an angle. It is a cost-effective alternative to jack chain, threaded rod, and associated hardware in lighting and other installation projects. Features: Cable Clip 15-18 mm (0.500" - 0.718" MC/AC...

The anchors can be installed with a standard drill eliminating the need for elaborate powder-actuated tool systems. The drive sleeve conveniently fits over the drill bit to minimize handling and installation time. Features: Easy installation of 3/8-16 or 1/4-20 threaded rod Installs and taps...

The anchors can be installed with a standard drill eliminating the need for elaborate powder-actuated tool systems. The drive sleeve conveniently fits over the drill bit to minimize handling and installation time. Features: Easy installation of 3/8-16 or 1/4-20 threaded rod Installs and taps...

The anchors can be installed with a standard drill eliminating the need for elaborate powder-actuated tool systems. The drive sleeve conveniently fits over the drill bit to minimize handling and installation time. Features: Easy installation of 3/8-16 or 1/4-20 threaded rod Installs and taps...

The anchors can be installed with a standard drill eliminating the need for elaborate powder-actuated tool systems. The drive sleeve conveniently fits over the drill bit to minimize handling and installation time. Features: Easy installation of 3/8-16 or 1/4-20 threaded rod Installs and taps...

The anchors can be installed with a standard drill eliminating the need for elaborate powder-actuated tool systems. Only the concrete application requires a pre-drilled hole. The drive sleeve conveniently fits over the drill bit to minimize handling and installation time. Features: Easy installation of...

Accommodates 1/2" and 3/4" EMT conduit and MC/AC cable. Features: Alignment tab positively locates the fastener on the stud, keeping your conduit in line with box knock out and CADDY H-series brackets For wood or metal stud Eliminates offset bending conduit Now gangable for...

The Adjustable Far Side Box Support provides far side electrical box support in various stud wall depths. Installs in seconds with hammer For 2-1/2" & 3-1/2" studs Box of 100 Delivers compliance with: NEC Article 300-4(d) when used for 4" and 4-11/16" outlet boxes...

The improved design of the Screw Gun Box Bracket has stamped inch markings and pilot holes which accelerates precise box and conduit mounting between studs. Features: Can mount multiple 1-1/2" or 2-1/8" deep boxes. Notched and marked for easy identification and bending Pilot holes...

The improved design of the Screw Gun Box Bracket has stamped inch markings and pilot holes which accelerates precise box and conduit mounting between studs. Features: Can mount multiple 1-1/2" or 2-1/8" deep boxes. Notched and marked for easy identification and bending Pilot holes...

Provides secure support of NMC or MC/AC to metal/wood stud in seconds. One fastener, four applications. Features: No tools required Delivers compliance with: NEC 300-4(d), CEC 12-618 and CEC 12-510 NMC sizes 14-2 with ground thru 12-3 with ground MC/AC cable sizes 14-2 thru...

Provides a quick means of support for horizontal runs of MC/AC through metal stud. Features: Eliminates conduit rattling Installs with a screw gun Box of 100

Provides a quick means of support for horizontal runs of 1/2" or 3/4" Conduit through metal stud. Features: Eliminates conduit rattling Installs with a screw gun Box of 100

Provides a quick means of support for horizontal runs of 1/2" to 3/4" conduit through metal stud. Features: Eliminates conduit rattling Installs with a screw gun Box of 100

Provides a quick means of support for horizontal runs of MC/AC (14-2, 14-3, 12-2, or 12-3) cable through metal stud. Features: One-piece spring steel design snaps onto stud Eliminates conduit rattling Installs with a screw gun Box of 100

Provides a quick means of support for horizontal runs of Rigid, EMT, MC/AC or ENT through metal stud. Features: One-piece spring steel design snaps onto stud 1/2" and 3/4" EMT Conduit, 1/2" Rigid, IMC, PVC Sch 40 5/8" and 3/4" Copper Tube and MC/AC...