Cable Supports, Clips, Clamps
-
Vertical front and rear duct with spacer.
- From $76.65
- From $76.65
- Unit price
- per
-
Stores slack cable and maintains a minimum of 1.18" bend radius. Designed to be mounted on the duct fingers and it can be adjusted to a variety of slack loop sizes.
- From $14.83
- From $14.83
- Unit price
- per
-
Designed to easily open and close duct cover for increased protection and easy access.
- $9.88
- $9.88
- Unit price
- per
-
Mounts on the duct fingers. Each cable retainer is adjustable to slide along the duct finger and includes break-away detail to accommodate all duct sizes.
- $18.55
- $18.55
- Unit price
- per
-
Versi-Duct horizontal 1RU slotted duct. Duct Features: Dimensions: 19" L x 1.5" x 3" Front and 1.5" x 4" Rear
- $52.10
- $52.10
- Unit price
- per
-
Leviton's Category 5e Angled Patch Panel allows cables to flow directly into vertical cable managers, reducing the need for front horizontal wire management, and freeing up vertical rack space for increased rack density. The dual-angle design keeps terminations within a standard 3" depth rack....
- $292.66
- $292.66
- Unit price
- per
-
The CADDY range of 4G clips are used for suspending signs, electrical services, etc. to suspended Tee Bars. Features: Supports electrical fixtures from acoustical tee bar 9/16", 15/16" or 1-1/2" wide 1/4"-20 stud – 5/8", 1-1/2", 2" or 3" long Washer-Wing Nut (4WN) included...
- From $98.94
- From $98.94
- Unit price
- per
-
The Cable Support Hanger has a J-Hook angle bracket and is pre-riveted for easy assembly. Features: Longer leg angle bracket for tool clearance Improved for easier installation with pin drivers Star hole provides more gripping power to align brackets Pregalvanized steel finish Available in...
- $209.52
- $209.52
- Unit price
- per
-
The Cable Support Hanger has a J-Hook angle bracket and is pre-riveted for easy assembly. Features: Longer leg angle bracket for tool clearance Improved for easier installation with pin drivers Star hole provides more gripping power to align brackets Pregalvanized steel finish Available in...
- $203.13
- $203.13
- Unit price
- per
-
The Erico CADDY Flange Mount Conduit Clip has a rigid and aluminum construction. Features: Requires only a hammer and pliers to install Will pivot through 360° Supports a load up to 25 lbs. Standard Box of 100 Mount Specificatoins: 16M24SM: 1" conduit to 1/8"...
- From $137.88
- From $137.88
- Unit price
- per
-
The Erico CADDY Flange Mount Conduit Clip has a rigid and aluminum construction. Features: Requires only a hammer and pliers to install Will pivot through 360° Supports a load up to 25 lbs. Standard Box of 100
- From $168.97
- From $168.97
- Unit price
- per
-
The Erico CADDY Flange Mount Conduit Clip has a rigid and aluminum construction. Features: Requires only a hammer and pliers to install Will pivot through 360° Supports a load up to 25 lbs. Standard Box of 50
- From $95.02
- From $95.02
- Unit price
- per
-
The Erico CADDY Flange Mount Conduit Clip has a rigid and aluminum construction. Features: Requires only a hammer and pliers to install Will pivot through 360° Supports a load up to 25 lbs. Standard Box of 50
- From $104.22
- From $104.22
- Unit price
- per
-
The Erico CADDY Flange Mount Conduit Clip has a rigid and aluminum construction. Features: Requires only a hammer and pliers to install Will pivot through 360° Supports a load up to 25 lbs. Standard Box of 100
- From $292.58
- From $292.58
- Unit price
- per
-
ERICO offers the CADDY CABLECAT- Wide Base Cable Support as a non-continuous pathway for high-speed communication cables based on the properties of the cables. Features: Cost-effective alternative to expensive cable tray Multiple tree configurations possible Galvanized finish on J-hooks provide smoother cable pull and...
- From $115.77
- From $115.77
- Unit price
- per
-
ERICO offers the CADDY CABLECAT- Wide Base Cable Support as a non-continuous pathway for high-speed communication cables based on the properties of the cables. Features: Specifically designed for high-performance data cables Wide base and smooth edges provide proper support and allow flexible installation with...
- From $114.63
- From $114.63
- Unit price
- per
-
ERICO offers the CADDY CABLECAT- Wide Base Cable Support as a non-continuous pathway for high-speed communication cables based on the properties of the cables. Features: Cost-effective alternative to expensive cable tray Multiple tree configurations possible Galvanized finish on J-hooks provide smoother cable pull and...
- From $229.07
- From $229.07
- Unit price
- per
-
The Wide Mouth Beam Clamps permit quick attachment to beam flanges up to 7/8" thickness without drilling or welding. Features: Heavy duty steel beam clamp to fit up to 7/8" (22mm) thick flanges 3/8"-16 rod & 3/8"-16 bolt (650 lbs capacity) Threaded to allow...
- $549.87
- $549.87
- Unit price
- per
-
The Wide Mouth Beam Clamps permit quick attachment to beam flanges up to 7/8" thickness without drilling or welding. Features: Heavy duty steel beam clamp to fit up to 7/8" (22mm) thick flanges 1/2"-13 rod & 1/2"-13 bolt (1,100 lbs capacity) Threaded to allow...
- $183.92
- $183.92
- Unit price
- per
-
The Wide Mouth Beam Clamps permit quick attachment to beam flanges up to 7/8" thickness without drilling or welding. Features: Heavy duty steel beam clamp to fit up to 7/8" (22mm) thick flanges 5/8"-11 rod & 1/2"-13 bolt (1,600 lbs capacity) Threaded to allow...
- $239.55
- $239.55
- Unit price
- per
