Cable Supports, Clips, Clamps

This innovative flush-mount wall board bracket is designed to hold round style modular jack plate assemblies. To install, simply drill a 2 3/8" diameter hole into dry wall, insert bracket into hole and, using a flat blade screwdriver, tighten patented sure-grip pads to hold...

Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents. Nylon cable ties can be laced through the 4 square holes in the...

Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents.

Protects electrical, Datacomm, and plumbing wood and metal studs. Fastest nail plate protection; no tools required. Features: 16 GA. steel to meet NEC 300-4(b)(2) Breakable tabs permit multiple plates to be ganged together Corrosion resistant zinc phosphate coating

The "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available. Features: Easy installation to beam flanges up to 1/2" Supports 1/4" and 3/8" threaded rod, S-hooks, electrical boxes, Conduit, J-hooks and bridle rings Accommodates standard 1/4"-20 or #10-24...

The "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available. Features: Easy installation to beam flanges up to 1/2" Supports 1/4" and 3/8" threaded rod, S-hooks, electrical boxes, Conduit, J-hooks and bridle rings Accommodates standard 1/4"-20 or #10-24...

Permits attachment of 1/4"-20 threaded components to the top or bottom flange of beams. Available in package of 100. Features: Easy installation to steel members up to 3/4" (20 mm) thick Reversible to allow installation to both top and bottom flange Hardened cup point...

Low voltage, data and MC/AC cable to 1/16" thru 3/16", 3/16" thru 9/32", and 5/16" thru 1/2" flange thickness. Features: Supports cable from 1/16"-1/2" flange Works effectively with MC and AC cable dimensions 3/8"-11/4" and low voltage cables from 7/32" and up Clip "snaps"...

Used to suspend #8 wire or 1/4" plain rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install Pack of 100

Used to suspend 3/8" (plain) rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install

Used to suspend 1/4" threaded rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install Box of 100

Used to suspend 3/8" threaded rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install

Used to suspend 1/4" or 3/8" threaded rods from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install

Angle Bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160 lbs. For #8 wire or 1/4" plain rod Note: Loads indicated are for CADDY fasteners only. Method of attachment...

Offset Bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160 lbs. For #8 wire or 1/4" plain rod Note: Loads indicated are for CADDY fasteners only. Method of attachment...

Offset Bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160 lbs. For 3/8" plain rod Note: Loads indicated are for CADDY fasteners only. Method of attachment to structure must...

Angle Bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160lbs For 3/8" plain rod Note: Loads indicated are for CADDY fasteners only. Method of attachment to structure must be...

Angle Bracket suspends plain rod, threaded rod, or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160 lbs. For 1/4" threaded rod, with thread impression Pack of 100 Note: Loads indicated are for CADDY fasteners only....

Offset Bracket suspends plain rod, threaded rod, or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160 lbs. For 1/4" threaded rod, with thread impression Pack of 100 Note: Loads indicated are for CADDY fasteners only....

Offset Bracket suspends plain rod, threaded rod or wire drops from laminated wood or concrete beams, joists, ceilings and walls. Features: Static load limit 160 lbs. For 3/8" threaded rod, with thread impression Note: Loads indicated are for CADDY fasteners only. Method of attachment...