Cable

4 conductor, 6 position modular plug for flat cord. Features: Designed for solid 22/24GA wire 4 conductor Used with flat cord Meets FCC Part 68 requirement Sold in a Package of 100 Plugs

6 conductor, 6 position modular plug for flat cord. Package of 100. Features: Designed for solid 22/24GA wire 6 conductor Used with flat cord Meets FCC Part 68 requirement Sold in a Package of 100 Plugs

8 conductor modular plug for rounded cord with stranded wire. Features: Designed for stranded wire 8 position, 8 conductor Used with round cord Meets FCC Part 68 requirement Sold in a Package of 100 Plugs

10 conductor modular plug for stranded wire. Features: Designed for stranded wire 10 position, 10 conductor Meets FCC Part 68 requirement Body size is same as AT8X8 Sold in a Package of 50 Plugs and a Package of 100 Plugs

4 and 2 conductor modular "T" adapter that is ideal for combining voice and data transmission through a single jack. Features: U.L. Certified

Assememblies consisting of combinations of three 25-pair amphenol connectors (male and female) mounted in a rugged grey thermoplastic housing with cover.

A very convenient series of adapters that permit a single line telephone set, answering device, auto-dialer or other ancillary equipment to be connected to an existing 25-pair ribbon connector.The jacks on all units is 4-conductor except the AT153AM-06 which is 6-conductor. AT153AM Features: Each...

25 pair (50 conductor) male amphenol connector in a plastic housing. Equipped with 7" color coded stranded leads. The leads may be field soldered to any of the contacts on the connector in order to meet specific requirements.

50 pin male amphenol connector and an 8 position 8 conductor non-keyed modular jack. Internal wiring from the 8-position modular jack to terminals of the 50-pin connector. Models available: AT259A Cable pairs - 1-4 Tip contacts - 26-29 Ring contacts - 1-4 AT259B Cable...

Modular adapter designed to provide a connection between 50-pin amphenol connector and 4, 6 or 8 conductor line cords. Consists of either male or female 50-pin amphenol connector and 6, 8 or 12 modular jacks. Each jack is clearly marked to identify its associated...

Consists of a modular cord stub 5" in length which terminates into a thermoplastic housing containing a 4-contact, 6-position modular jack. A double wound inductor is wired in series between the cord and a jack. Used for elimination of radio frequency interference especially in...

6-contact, 6-position DEC plug for line cords. Features: Designed for stranded wire UL and SA Certified Note: Modular plugs meet F.C.C. part 68 requirement

4-conductor flat silver satin line cord.

Baluns are employed in data circuits to act as an interface between twisted wire pairs and coaxial circuits. The GB422M consists of a plastic rectangular housing enclosing a nominal 93-ohm, transformer-type balun connected to a coaxial connector on one end, and to a 6-position,...

A singularly simple method of diagnosing RS232 interface problems. Connected from the RS232 port to a data line or modem. LEDs indicate the status of pin 2 (Transmit Data, TD), pin 3 (Receive Data, RD), pin 4 (Request to Send, RTS), pin 5 (Clear...

These units replace two modems when interconnecting two data devices together over short distances. The units operate within EIA RS232C specifications. Install directly to equipment or insert between two cables.

24 port fiber SC bulkhead with 3 duplex adapters with mounting brackets. Completely removable top with tilt-up, removable front and rear doors provides unobstructed access to the panel interior. Features: Completely removable top with tilt-up, removable front and rear doors provides unobstructed access to...

Low profile rack mount fiber optic patch panel without rails punched for 24 ST adapters. Adapters sold separately - see 49882-SAD or 49883-ZAD. Features: Completely removable top with tilt-up, removable front and rear doors provides unobstructed access to the panel interior Mounting brackets are...

Low profile rack mount fiber optic patch panel without rails punched for 12 duplex SC adapters (24 ports). Adapters sold separately - see 49884-SAD, 49884-MAD or 49884-BAD. Features: Completely removable top with tilt-up, removable front and rear doors provides unobstructed access to the panel...

24 port fiber SC bulkhead with 3 duplex adapters with slide rails. Completely removable top with tilt-up, removable front and rear doors provides unobstructed access to the panel interior. Features: Completely removable top with tilt-up, removable front and rear doors provides unobstructed access to...