Chatsworth Cable Pathway Support Solutions

Used in cable runway installations. The trimmed head will not catch or cut cables. Features: Nominal Size: 3/8-16 Trimmed round head square neck bolts Includes nut and split lock washer Gold over zinc plating

Used in cable runway installations. The trimmed head will not catch or cut cables. Features: Nominal Size: 3/8-16 Trimmed round head square neck bolts Includes nut and split lock washer Gold over zinc plating

Used to install racks onto wood or other soft surfaces. Features: Length: 2" Sold individually Gold over zinc plate finish

Used to install racks onto wood or other soft surfaces. Features: Length: 2" Gold over zinc plate finish

Cable Runway Wall to Standard and Universal Rack Kit with 3" Deep Mounting Channels provides support for cables between the rack and the wall.  Usually ships in 4-6 weeks. Rack Kit Features: Kit Part Number 11911 is for attaching a Standard and/or Universal series...

May be used on other runway series with Cable Runway Movable Cross Member (Model # 12115). Features: Quick and easy installation using clevis pin Fits 6", 9", 12" and 18" cross member tubing For use only with runs on CPI Universal runway (Model #...

Secures cable runway to the top of Standard and Universal equipment racks. J-Bolts hook under the mounting plate to secure the plate to the rack's top angles. Mounts either parallel or perpendicular. Features: Mounting plates add 1.25" to height of rack Aluminum Material 20"...

Air dry waterborne paint for touching up finish. Matches color and gloss of Chatsworth textured paint. Returns and Cancellations: Due to the specialized Made to Order nature of this product and manufacturer requirements, this product is not returnable and cannot be canceled once ordered....

Slotted holes allow bend radius location to be user adjustable. Mounting screws not included. Features: Provides 1 1/2" bend radius for compliant installation of Category 5/5e/6 or fiber cable Telescopes to adjust cable entry or exit position Mounts on 19" or 23" rack. May...

Cable Runway Pathway Dividers divide Cable Runway into multiple cable pathways. Use dividers to organize cables supported by Cable Runway according to media type or destination. Cable Runway Pathway Dividers can also be used to organize horizontal cables by destination according to route orzone....

Cable Runway Patch Panel Rack is a miniature two-post rack that can be attached to CPI Cable Runway. Cable Runway Patch Panel Rack saves rack-mount space in a rack or cabinet that stores computer and data storage equipment by placing patch panels or interconnect...

Add cable management with the accessory D-Ring Kit to your Cable Runway Patch Panel Rack. Available in packages of 6 or 10.

Use the Diameter Fiber Management Spool to support fiber and copper cables within CPI's extensive line of vertical cabling sections. The spools meet EIA/TIA bend radius requirements and minimize cable tangles and tears for more efficient data transmission. Features: Provides proper cable support and...

Use the 2"-Diameter Fiber Management Spool to support fiber and copper cables within CPI's extensive line of vertical cabling sections. The spools meet EIA/TIA bend radius requirements and minimize cable tangles and tears for more efficient data transmission. Features: Provides proper cable support and...

The PatchRack is a miniature two-post rack that can be attached to CPI Cable Runway to save rack-mount space by placing patch panels or interconnect equipment above the rack or cabinet. Use Patch Rack to create a zone network in the data center. Racks...

The PatchRack is a miniature two-post rack that can be attached to CPI Cable Runway to save rack-mount space by placing patch panels or interconnect equipment above the rack or cabinet. Use Patch Rack to create a zone network in the data center. Use...

Secures cable runway to the top of Standard and Universal equipment racks. J-Bolts hook under the mounting plate to secure the plate to the rack's top angles. Mounts either parallel or perpendicular. Features: Mounting plates add 1.25" to height of rack Aluminum Material 20"...

Cable Tray Covers are used to cover the top of a section of wire mesh cable tray to protect or hide cables. Tray Cover Features: Hemmed edges protect the installer Attaches to the tray with fold-over tabs formed along the edge of the cover;...

To attach cable runway to Wall Angle Support or a Wall Support Bracket. 11308-701 Features: 2 each 5/16-18 x 2-1/4" J-bolts (11431-001) 2 each 5/16-18 hex nuts 2 each 5/16 split lock washers