Computer & Server Racks
-
Rite-On marker dispensers are loaded with self-laminating labels. Clear tail that seals the legend under clear vinyl. Features: 3/4" W x 3/4" L write-on area 3/4" W x 3" L marker size .70" min. wire size 1.500" max. wire size 1 dispenser/package 90 markers/roll...
- $15.95
- $15.95
- Unit price
- per
-
Power Strip can be mounted in all HPW cabinets and racks with 10 outlets on the rear to distribute power to active equipment. Does not provide surge protection. Power Strip Features: 20 Amp Mounts into 19" racks and cabinets On/off switch Power on LED...
- $291.36
- $291.36
- Unit price
- per
-
Can be mounted in all HPW cabinets and racks to distribute power to active equipment. Power strip with 10 outlets on the front. Does not provide surge protection. Power Strip Features: Power on LED indicator Built-in circuit breaker Rear outlets: 0 10' power cord...
- From $201.36
- From $201.36
- Unit price
- per
-
Can be mounted in all HPW cabinets and racks to distribute power to active equipment. Power strip with 20 outlets on the front. Does not provide surge protection. Power Strip Features: Power on LED indicator Built-in circuit breaker Rear outlets: 0 10' power cord...
- From $264.52
- From $264.52
- Unit price
- per
-
Typically utilized in tandem with a Rack Mount Interconnect Center (RIC). Features: Jumpers exiting the front of the RIC are routed into FSC to store slack Enhanced design features new bend radius compliant managers which facilitate loading of jumpers Single-finger latch on door for...
- $535.97
- $535.97
- Unit price
- per
-
Black
-
White
-
Includes dual-level fiber managers, port designation labels and removable pocket, dust-proofing grommets, strain relief hardware, cable ties, and mounting hardware. Features: Convenient labeling system for storing and protecting fiber documentation Doors on enclosure and jumper guard are available with independent key lock or latching...
- $132.18
- $132.18
- Unit price
- per
-
Black
-
White
-
Enables the economical interconnection of fiber in locations where wall space is limited while still providing many of the popular, installer-friendly features of the SWIC3. Features: By accepting two flat quick-Pack adapter plates, the Mini-SWIC3 can accomodate from 6-48 fibers Dust-proofing grommets are included...
- $129.14
- $129.14
- Unit price
- per
-
Black
-
White
-
19" Rack Mount Power Strip with a 20 Amp Circuit, 10 Receptacles, 10' Power Cord, and NEMA 5-20P Plug. Power Strip Features: Multiple mounting options provide a convenient power supply for active equipment Dual circuit option for use with equipment requiring a redundant power...
- $231.97
- $231.97
- Unit price
- per
-
Patch Panel Labels for Desktop Printers (Dot Matrix or Laser). 10,000 labels per pack. Lead time is 2 weeks. Features: Labels can be printed in both laser and ink jet printers Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware...
- $823.50
- $823.50
- Unit price
- per
-
White
-
An economical solution for managing fiber cable slack and splice trays. Features: Easily retrofits any standard 1, 2, or 3 RMS, CT or MAX Series Patch Panel Organizes up to 96 fibers Trays are only 254mm (10 in.) deep, allowing them to readily fit...
- From $224.25
- From $224.25
- Unit price
- per
-
Compression fitting utilized as an alternate method for securing cables to FCP3 fiber enclosures. Features: Resists water pressure up to 70psi Acme threads on the body prevent skipping, allowing for faster installations of lock-nuts Polymer material resists salt water, weak acids, gasoline, alcohol, oil,...
- From $19.28
- From $19.28
- Unit price
- per
-
Compression fittings are used as an optimized method for attaching cables to FCP3 fiber trunks. Acme threads in the system help prevent skipping for quick installations with locknuts.
- $36.41
- $36.41
- Unit price
- per
-
These aluminum trays can be ordered with either fusion, mechanical or fusion with sleeve splice holders. Features: Clear, snap-on polycarbonate cover included The standard tray holds up to 24 splices For tight areas, a mini-tray is available which accomodates up to 12 spices Trays...
- $49.82
- $49.82
- Unit price
- per
-
Faceplate Label, Single Gang Adhesive, 1.80" x 0.38" Dot-Matrix. Features: Provide easy, professional labeling of faceplates and surface mount boxes Designs for single gang, double gang and modular furniture faceplates
- $81.24
- $81.24
- Unit price
- per
-
Metal Embossing Tape System. Includes tool, carrying case, (1) roll each META (aluminum) and METS4 (stainless) tape. Features: Embosses .19" (5mm) characters onto rolls of stainless steel or aluminum tape Can be used with Pan-Steel ties as a flag or a marker Excellent for...
- $844.97
- $844.97
- Unit price
- per
-
Adhesive 110 Block Labels. Features: Eliminate the need for standard paper designation strips Labels are placed on top of label holders
- $230.20
- $230.20
- Unit price
- per
-
Pan-Ty Marker Tie 3.9" 18lbs. Features: Marker Ties fasten and provide a surface to identify bundles at the same time Can be marked with Panduit® Marker Pens Can be custom imprinted with text, symbols or trademarks using Panduit's Custom Hot Stamping Service Can be...
- $190.71
- $190.71
- Unit price
- per
-
Brown
-
Red
-
Orange
-
Yellow
-
The Pan-Pouch system provides a fast convenient method of identifying binder groups on both sides of a splice in PIC cable. Features: Pouch is 10 1/2" x 36" (266mm x 914mm) made of 2-ply laminated black nylon/vinyl and folds to 10 1/2" x 6"...
- $304.79
- $304.79
- Unit price
- per
-
For Desktop printers. Pack of 1000. 2.60 in x 0.34 in. Features: Labels can be printed in both laser and ink jet printers Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware Die-cut labels designed to provide maximum aesthetic quality...
- $166.49
- $166.49
- Unit price
- per
