Fasteners & Brackets
-
Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed. Features: Dimension A: 4", Dimension B: 3 7/8" Material is 1/8" x 1" steel strap with...
- $19.85
- $19.85
- Unit price
- per
-
Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed. Features: Dimension A: 4", Dimension B: 7 3/4" Material is 1/8" x 1" steel strap with...
- $23.90
- $23.90
- Unit price
- per
-
Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed. Features: Dimension A: 4", Dimension B: 4" Material is 1/8" x 1" steel strap with edges...
- $19.49
- $19.49
- Unit price
- per
-
Designed to support heavy cable runs, such as multiple PBX cable, IBM cabling, etc. Easily routes cabling wherever ceiling support of heavy cable is required. Can also be suspended from threaded drop rods. Features: Material is 1/8" x 1" steel strap with edges rolled...
- $19.44
- $19.44
- Unit price
- per
-
Mounts to the back of the rack channel to provide a convenient tie-down point for grounding and bonding cable runs. Either end of the nylon bracket can be attached to the rack or cabinet face, allowing cable run in several different ways. Features: 1"...
- From $18.12
- From $18.12
- Unit price
- per
-
Have you ever pulled cables out of rack-mounted equipment accidentally? Do you need to maintain a minimum bend radius for your cabling? Our rack- mounted cable strain relief may just be the answer. Made of high-strength aluminum, it includes ten flexible Saf-T-Grip cable management...
- From $166.98
- From $166.98
- Unit price
- per
-
Clear
-
Gray
-
White
-
Black
-
This innovative flush-mount wall board bracket is designed to hold round style modular jack plate assemblies. To install, simply drill a 2 3/8" diameter hole into dry wall, insert bracket into hole and, using a flat blade screwdriver, tighten patented sure-grip pads to hold...
- From $17.40
- From $17.40
- Unit price
- per
-
Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents. Nylon cable ties can be laced through the 4 square holes in the...
- From $16.71
- From $16.71
- Unit price
- per
-
Gray
-
Beige
-
Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents.
- From $13.88
- From $13.88
- Unit price
- per
-
Gray
-
Beige
-
Nail Clip (Pkg of 100) are tough, precision engineered clips that hold wire and cable securely in place. The nail is hardened for driving into wood, masonry joints, cinder blocks and mortar. Nail Clip Features: Nails are perpendicular to the work surface and are...
- $7.50
- $7.50
- Unit price
- per
-
Black
-
White
-
Protects electrical, Datacomm, and plumbing wood and metal studs. Fastest nail plate protection; no tools required. Features: 16 GA. steel to meet NEC 300-4(b)(2) Breakable tabs permit multiple plates to be ganged together Corrosion resistant zinc phosphate coating
- From $72.23
- From $72.23
- Unit price
- per
-
The "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available. Features: Easy installation to beam flanges up to 1/2" Supports 1/4" and 3/8" threaded rod, S-hooks, electrical boxes, Conduit, J-hooks and bridle rings Accommodates standard 1/4"-20 or #10-24...
- From $178.02
- From $178.02
- Unit price
- per
-
The "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available. Features: Easy installation to beam flanges up to 1/2" Supports 1/4" and 3/8" threaded rod, S-hooks, electrical boxes, Conduit, J-hooks and bridle rings Accommodates standard 1/4"-20 or #10-24...
- From $178.02
- From $178.02
- Unit price
- per
-
Permits attachment of 1/4"-20 threaded components to the top or bottom flange of beams. Available in package of 100. Features: Easy installation to steel members up to 3/4" (20 mm) thick Reversible to allow installation to both top and bottom flange Hardened cup point...
- $175.03
- $175.03
- Unit price
- per
-
Low voltage, data and MC/AC cable to 1/16" thru 3/16", 3/16" thru 9/32", and 5/16" thru 1/2" flange thickness. Features: Supports cable from 1/16"-1/2" flange Works effectively with MC and AC cable dimensions 3/8"-11/4" and low voltage cables from 7/32" and up Clip "snaps"...
- From $50.31
- From $50.31
- Unit price
- per
-
Used to suspend #8 wire or 1/4" plain rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install Pack of 100
- From $120.22
- From $120.22
- Unit price
- per
-
Used to suspend 3/8" (plain) rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install
- From $130.44
- From $130.44
- Unit price
- per
-
Used to suspend 1/4" threaded rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install Box of 100
- From $124.34
- From $124.34
- Unit price
- per
-
Used to suspend 3/8" threaded rod from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install
- From $130.65
- From $130.65
- Unit price
- per
-
Used to suspend 1/4" or 3/8" threaded rods from beam flanges 1/8" to 3/4" thick. Features: Static load limit 200 lbs. Requires only a hammer to install
- From $127.13
- From $127.13
- Unit price
- per
