Fasteners & Brackets
-
New Threaded Rod Bracket for 2X2 and 4X4 Fiber-Duct System. Bracket Features: Used for supporting the 2x2 and 4x4 Fiber-Duct Systems from new threaded rod installations Bracket is secured to threaded rod with two nuts Contains hardware for attaching to threaded rods and hardware...
- $19.60
- $19.60
- Unit price
- per
-
PB3 BaseTrak Raceway Wire Clip is part of Hubbell's Raceway Systems which utilize innovative technologies, easy mounting, and provide greater data capacity. Wire Clip Features: Raceway Wire Clip is a non-metallic multi-service product designed for the PB3 BaseTrak Three Channel Raceway Series For Holding...
- $18.06
- $18.06
- Unit price
- per
-
TDHP2 Decking Hanger Punch has been redesigned to include more features. The improved punch can be adjusted from 0.47" to 3.15" according to individual requirements. Press-fit ejector springs allow for easier removal of the one-piece hole punches after the punching operation is completed. The...
- $476.50
- $476.50
- Unit price
- per
-
Foam Mounting Tape in Acrylic and Rubber Adhesive. Features: Acrylic foam tape– Recommended for high temperature and outdoor applications (180° F) and exposure to UV light Rubber foam tape –Excellent quick tack designed for long term shear loads in indoor applications up to 120°...
- From $76.18
- From $76.18
- Unit price
- per
-
Foam Mounting Tape in Acrylic and Rubber Adhesive. Features: Recommended for high temperature and outdoor applications (180° F) and exposure to UV light. Excellent quick tack designed for long term shear loads in indoor applications up to 120° F Foam tape, 1/32" (thick) x...
- From $76.16
- From $76.16
- Unit price
- per
-
Corrugated Loom Tubing is offered for applications where spiral wrap or braided expandable sleeving may be difficult to install or where they do not offer the amount of protection required. This version features a lengthwise slit which makes it easy to install onto a...
- From $42.96
- From $42.96
- Unit price
- per
-
Orange
-
Black
-
Yellow
-
Panduit Spiral Wrapping is used to harness multiple cable into a single manageable bundle. Spiral Wrapping Features: Largest variety of colors materials and sizes in the industry Available in seven different materials and twelve different colors Outside Diameter: 0.5" Bundle Range Diameter: 3/8"-4" Flexible,...
- From $134.20
- From $134.20
- Unit price
- per
-
Natural
-
Gray
-
Brown
-
Red
-
Slotted Wall Polyethylene Grommet Edging. 100 foot roll. Features: General purpose material for indoor use up to 122°F (50°C) Use on irregular shaped and round panel holes Protects and insulates wires and cables from chafing against sharp edges Adhesive lined
- From $45.47
- From $45.47
- Unit price
- per
-
Black
-
Natural
-
Heat Shrink in 6" Pieces and 25' Reels. Features: Small package fits easily in tool box Shrink ratio of 2:1 insulates a wide range of diameters and irregular shapes Cross-linked, UV resistant material improves flame retardancy, chemical, and temperature resistance Provides protection for fiber...
- $16.80
- $16.80
- Unit price
- per
-
Dual Wall Adhesive Lined Thin Wall Heat Shrink. Features: For damp locations 6" length Flexible tubing with an adhesive inner wall which seals and protects components from moisture and corrosion The 3:1 shrink ratio is a benefit when working with connector-to-cable transitions Material Type:...
- $16.80
- $16.80
- Unit price
- per
-
HSEC wet shrink thick wall end cap used to cap cable ends and protect from moisture. Features: For wet locations Provides excellent protection for sealing ends of wire or cable Adhesive lined inner wall seals and protects against moisture Material Type: Polyolefin Cross-Linked with...
- From $48.51
- From $48.51
- Unit price
- per
-
Low Temperature Tool. Features: For use on small sizes of Panduit® Pan-Shrink Heat Shrink when heat sensitive items are under or near the heat shrink Air intake regulator varies temperature Neoprene jacketed cord with molded strain relief Replaceable bearings
- $166.79
- $166.79
- Unit price
- per
-
Shrink Tube Reflector for tubing up to 3/4" inside diameter. Directs heat around tubing to reduce shrink time. Features: For use with all Panduit® Heat Shrink Neoprene jacketed cord with molded strain relief Adjustable stand included UL Listed (Tools Only), CSA Certified (Tools Only)...
- $27.14
- $27.14
- Unit price
- per
-
Shrink Tube Reflector for tubing up to 1– 1/2" inside diameter. Directs heat around tubing to reduce shrink time. Features: For use with all Panduit® Heat Shrink Neoprene jacketed cord with molded strain relief Adjustable stand included UL Listed (Tools Only), CSA Certified (Tools...
- $27.14
- $27.14
- Unit price
- per
-
Black polyethylene case stores heat tool stand and all three accessories. Features: For use with all Panduit® Heat Shrink Neoprene jacketed cord with molded strain relief Adjustable stand included UL Listed (Tools Only), CSA Certified (Tools Only) Mica insulation in the heat element provides...
- $131.05
- $131.05
- Unit price
- per
-
Coax Cable Clips Nail-in clips to manage RG59 or RG6 coaxial cable. Sold in Packs of 10.
- From $18.60
- From $18.60
- Unit price
- per
-
Corrugated Loom Tubing is offered for applications where spiral wrap or braided expandable sleeving may be difficult to install or where they do not offer the amount of protection required. This version features a lengthwise slit which makes it easy to install onto a...
- $255.03
- $255.03
- Unit price
- per
-
Corrugated Loom Tubing is offered for applications where spiral wrap or braided expandable sleeving may be difficult to install or where they do not offer the amount of protection required. This version features a lengthwise slit which makes it easy to install onto a...
- $209.24
- $209.24
- Unit price
- per
-
Provides full 360 degrees protection for cable and makes cable pulls easier. Features: Snap one grommet into standard 1-11/32" field punched hole, or snap two together into any shape factory punched hole Delivers compliance with: NEC article 300-4(b)(1) and CEC rule 12-516 Provides full...
- From $40.51
- From $40.51
- Unit price
- per
-
Metal Stud Punch is a new tool designed with offset handles that allows the punch to work in confined locations and near perpendicular walls. Punch Features: New cushioned handles means less operator fatigue and more comfortable handling Lightweight punch makes accurate location of holes...
- $423.06
- $423.06
- Unit price
- per
