Fasteners & Brackets
-
8" long cable tie wrap with tensile strength of 18 LB, natural color.
- From $4.97
- From $4.97
- Unit price
- per
-
Metric ring terminal, vinyl barrel insulated, butted seam, funnel entry, 0.5 – 1.0mm² wire range, M3 stud size. Features: Ring tongue design assures a secure connection in high vibration applications Insulation support helps to prevent wire damage in bending applications Brazed seam protects terminal...
- $60.69
- $60.69
- Unit price
- per
-
Die cast aluminum open end distributing ring designed for holding cross connect wires and cables in building cable terminals or on backboards or other surfaces. Eliminates threading. The open end comes with a protective plastic cap. Three Sizes: Small - 1-7/8" Opening x 2-3/4"...
- From $10.82
- From $10.82
- Unit price
- per
-
Die cast aluminum distributing ring (D-ring) designed for holding cross connect wires and cables in building cable terminals or on backboards or other surfaces. Available in packs of 10 or 25. Three Sizes: Small - 4-7/8" Wide x 1-7/8" Opening x 2-3/4" Deep Medium...
- From $31.78
- From $31.78
- Unit price
- per
-
White backboard equipped with 16 GB20 distribution posts (mushrooms) positioned to coincide with the "Jumper Channels" on the GB183 type backboards. Normally mounted in horizontal rows between lower and upper modular groupings of GB183 type backboards. Used only for routing cross-connect wires. The white...
- $24.26
- $24.26
- Unit price
- per
-
Eliminates need for electrical box when installing LV class 2 wiring. With no installation tools required to secure a bracket in the drywall opening, installation is fast and easy. Features: No sharp metal edges with new plastic design Serrated interlocking system secures tight Template...
- From $21.49
- From $21.49
- Unit price
- per
-
Eliminates need for electrical boxes on low voltage class 2 applications. No installation tools required to secure bracket in the drywall opening, making it fast and easy. Features: Double Gang Template dimples on the bracket provide measurement markings for simplified installation For low voltage...
- From $26.99
- From $26.99
- Unit price
- per
-
Provides bracket for mounting low voltage class 2 communications outlets. Features: Side support provides a rigid install Works with 1/2" or 5/8" dry wall Attaches with self-tapping screws or nails Bendable tabs provide cable tie off Front/side install on metal/wood stud Reduces bulges in...
- From $19.49
- From $19.49
- Unit price
- per
-
Provides bracket for mounting LV class 2 communications outlets. Bracket Features: Side support provides a rigid install Works with 1/2" or 5/8" dry wall Attaches with self-tapping screws or nails Bendable tabs provide cable tie off Front/side install on metal/wood stud
- From $28.96
- From $28.96
- Unit price
- per
-
Eliminates need for an electrical box when installing low voltage Class 2 wiring. Features: Provides positive support with locking screws (included) Simple install with a drywall saw and screwdriver Mounts any standard low voltage device in 1/2" through 1-1/4" walls Makes wire "fishing" easier...
- From $16.09
- From $16.09
- Unit price
- per
-
Work Area Outlets - Duplex Mounting Bracket. AT92 Bracket Features: Used for retrofit or new installation on drywall or wood panel type construction Made of .062 inch steel plate with threaded keeper tabs For use with low voltage Class 2 devices GTIN 0799158556964 Available...
- From $7.79
- From $7.79
- Unit price
- per
-
"Mushroom" for control and dressing of distribution cables and jumper wires. Available with or without screws.
- From $10.97
- From $10.97
- Unit price
- per
-
High-impact plastic spool (mushroom) used to neatly guide and retain cable or jumper wires. Cabling is held in place by the spool's rim to allow easy access for changes or modifications. Sold individually and in packages of 20, 50, and 100.
- From $16.88
- From $16.88
- Unit price
- per
-
High-impact plastic spool (mushroom) used to neatly guide and retain cable or jumper wires. Cabling is held in place by the spool's rim to allow easy access for changes or modifications. Sold individually and in packages of 20, 50, and 100.
- From $52.50
- From $52.50
- Unit price
- per
-
High-impact plastic spool (mushroom) used to neatly guide and retain cable or jumper wires. Cabling is held in place by the spool's rim to allow easy access for changes or modifications. Sold individually and in packages of 20, 50, and 100.
- $356.25
- $356.25
- Unit price
- per
-
These plastic rings snap directly onto the side of an S89-type mounting bracket to organize, position, and retain cable and cross-connect wire. They also work well as a patch cord manager when used with Siemon's Modular Patch Blocks. Sold individually and in packages of...
- From $19.63
- From $19.63
- Unit price
- per
-
Supports cable and wire in communication closets, on backboards, equipment racks or wherever cable runs are required. These rings are made of high-strength, fire-retardant material with rounded edges to prevent damage to cable and wire insulation while providing easy pull-through. Mounting hole configuration allows...
- From $10.60
- From $10.60
- Unit price
- per
-
Designed to mount to the upright channels of CPI Universal equipment racks. Made of high-strength, fire-retardant material with rounded edges prevent damage to cable and wire insulation while providing easy pull-through. The open-design "C" rings allow for easy adds, moves and changes, eliminating the...
- From $9.20
- From $9.20
- Unit price
- per
-
With CPI Distribution Rings all your wiring and cabling can now be neatly and easily organized and managed. Designed to support cable and wire in communication closets, on backboards, equipment racks, or wherever cable runs are required. The versatile brackets are made of high-strength,...
- From $5.33
- From $5.33
- Unit price
- per
