Fiber Optic Cables
-
ALTOS 36 fiber all-dielectric gel-free cable. Features Fully waterblocked loose tube gel-free design: Simple access and no clean up Medium density polyethylene jacket: Rugged, durable and easy to strip All-dielectric cable construction: Requires no grounding or bonding
- $623.21
- $623.21
- Unit price
- per
-
48-Fiber MIC Unitized Cable Riser Rated. Cable Features: Fiber Code: E Performance Option Code: Single-mode
- $18,138.40
- $18,138.40
- Unit price
- per
-
ALTOS Lite Gel Free cables are designed for campus backbones in direct buried installations. Features: Fully water blocked loose tube gel free design Single armored construction which provides additional crush and rodent protection High strength rip cord Ready for any application including Gigabit and...
- $4,818.32
- $4,818.32
- Unit price
- per
-
12-Fiber SOLO ADSS Cable Std MDPE SMFe 0.35/0.35/0.25 dB/km 6f/tube Medium NESC Heavy 500' Span, Medium 700', Light 800'. Minimum Order Quantity is 5,248 Feet.
- $4,395.99
- $4,395.99
- Unit price
- per
-
FREEDM LST Gel-Free Cable Riser Rated 50 µm Standard is fully water-blocked using craft-friendly water-swellable yarns and tapes, making cable access simple and requiring no clean-up. FREEDM LST Features: Available with interlocking armor, enables easy one-step installation of protected cable FREEDM LST features smaller...
- From $2,515.19
- From $2,515.19
- Unit price
- per
-
SC to SC multimode simplex patch cord, 3mm jacketed cable (one SC connector on each end) – 62.5/125µm. F6S3-3M1Y Patch Cord Features: Pass all TIA/EIA-568-B.3 performance requirements Insertion loss per connection: 0.10dB typical; 0.30dB maximum Factory terminated and 100% tested for insertion loss Insertion...
- $29.68
- $29.68
- Unit price
- per
-
SC to LC Singlemode duplex patch cord, 1.6mm jacketed cable (two SC connectors on one end and one duplex LC connector on the other end) – 9/125μm. Patch Cord Features: Pass all TIA/EIA-568-B.3 performance requirements 100% factory inspected end face geometry in compliance with...
- $77.01
- $77.01
- Unit price
- per
-
SC to LC Singlemode simplex patch cord, 1.6mm jacketed cable (one SC connector on one end and one LC connector on the other end) – 9/125μm. Featurs Pass all TIA/EIA-568-B.3 performance requirements 100% factory inspected end face geometry in compliance with Telcordia GR-326-CORE, Issue...
- From $68.33
- From $68.33
- Unit price
- per
-
FREEDM Loose Tube Gel-Free Plenum Cable are flame-retardant, indoor/outdoor, plenum-rated cables suitable for installation in inter- and intrabuilding backbones in aerial, duct and riser or plenum applications. Plenum Cable Features: Loose Tube design offers mechanical ruggedness and environmental durability while the all-dielectric cable construction...
- $18,774.45
- $18,774.45
- Unit price
- per
-
2-F 62.5/125 TB PLENUM MIC 3.5/1.0DB/KM 200/500MHZ*KM GIG-PLUS (P/N 370-949-FDDI-02) Corning Cable Systems OFNP MIC Cables utilize 900 μm TBII® Buffered Fibers surrounded by dielectric strength members with a flexible, flame-retardant outer jacket. These cables meet the application requirements of the National Electrical Code®...
- $2,621.38
- $2,621.38
- Unit price
- per
-
SYSTIMAX TeraSpeed Solution was developed to provide a fiber optic solution that is the metro/campus backbone for today's performance requirements. Features: Provides the widest possible usable wavelength spectrum by eliminating the high loss caused by water impurities Designed to cost-effectively future-proof enterprise campus backbones...
- $794.50
- $794.50
- Unit price
- per
-
MIC Unitized Plenum Cables are designed for use in plenum, riser and general purpose environments for intra-building backbone installations. Features: All die-electric cable construction requires no bonding or grounding Ideal for routing inside buildings, within plenum areas and riser shafts, to the telecommunications rooms...
- From $12,441.30
- From $12,441.30
- Unit price
- per
-
Berk-Tek's loose tube cable design can be used in all typical campus and outdoor/indoor installations, and is available with standard multimode, single-mode and GIGAlite fibers. This design affords the installer the ability to place cable anywhere in a network, bypassing the traditional transition points...
- From $1,036.46
- From $1,036.46
- Unit price
- per
-
Tripp Lites N458-001-62, 62.5/125 micron, LC/SC, Male-to-Female Fiber adapter cable allows you to utilize older installed SC fiber cables when upgrading to newer switches using LC type SFP or GBIC transceivers. Simply plug the LC male end into the new switch, and plug your...
- $48.62
- $48.62
- Unit price
- per
-
Optic Cleaning Kits have the best tools to effectively remove the toughest contaminants with ease. Kit Includes: Five Cards with Sealed Cleaning Zones Solvent Pen Wipes 2.5mm Port Cleaning Swabs
- $115.99
- $115.99
- Unit price
- per
-
FREEDM LST Gel-Free Cables are designed for inter-building and intra-building backbones in aerial, duct and riser applications. Features: Standard 3 mm buffer tube size reduces the number of access tools required by crafts persons Flame-retardant jacket is rugged, durable and easy to strip Compact...
- From $998.19
- From $998.19
- Unit price
- per
-
Corning Cable Systems MIC® Plenum Cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multi-fiber cables use 900 μm TBII Buffered Fibers to allow easy, consistent stripping and to facilitate termination. The fibers are...
- $837.85
- $837.85
- Unit price
- per
