Legrand/Wiremold® 500 & 700 Series One-Piece Steel Raceway

500® Series Raceway Tee connects branches of 700 series raceway at right angles. Features: Connects branches of 700 series raceway at right angles break out crescent twistout in cover when used with 700 series raceway Available Colors: Ivory White

500® and 700® Series Raceway Utility Box can be used as a tee, cross, pull box, junction box, or blank box. Features: Can be used as tee, cross, pull box, junction box, or blank box Cover has 1/2" trade size KO and twistouts for...

Extra Deep Device Box, Extra Deep Device Box, 1 Gang, Length 4 5/8 Inch, Width 2 7/8 Inch, Depth 2 3/4 Inch, Steel, Scuffcoat Ivory, Approval UL (Canada and US), Used on V2400 Series Two Piece Steel Surface Raceway, Legrand Brand, 2000 Model, Surface...

Open base extension box fitting is designed to hang fixtures. Features: Cover accepts devices with mounting screw centers of 2 3/4", 3 1/2", and 4 1/16" Four holes for fixture studs Four 1/2" trade size KOs Raised section for no-bolt fixture-stud Available Diameters: 6...

500/700 Series Combination Switch & Receptacle Box Fitting. Connects to surface runs of 1/2" trade size conduit. Raceway Features: Cover has 1/2" trade size KOs and two raceway twistouts on one end and three raceway twistouts on opposite end, two 1/2" KOs and a...

Labor savings over-the- raceway box. A divided two-gang box for use with 2400D Series Raceway. Ships in 2 weeks. Features: Allows both power and low voltage at a single pointof- use For use with commercially available faceplates (not supplied)

One-gang, labor saving, over-the-raceway box for use with 2400D Series Raceway. Ships in 2 weeks. Features: Cover has two twistouts for 2400D Series Raceway Accepts industry standard faceplates for electrical and communication devices

Labor savings over-the- raceway box. A divided two-gang box for use with 2400D Series Raceway. Ships in 2 weeks. Box Fitting Features: Allows both power and low voltage at a single point-of-use Accepts the following: 5507 Series Faceplates Ortronics TracJack & Series II Modules...

Joins and supports lengths of 500 or 700 Series Raceway. One coupling included with each length of raceway.

700® Series Outside Elbow. Outside Elbow Features: Designed for Outside Surfaces at right angles Dimension: 2-1/2" Color: Ivory Sold in Packages of 10 and 20 Elbows

500® and 700® Series Ground Clamp provides additional grounding or grounds remotely located devices. Attach ground wire to screw as required by NEC. Insert into Model # V500 or Model # V700 raceway before installing.

Solid Base Fixture Box is for feeding raceway from ceiling or floor. It allows ample splice room. Each leg of the base has 1/2" trade size KO. Color: Ivory.

Elbow Box Connector Fitting connects raceway at right angles to conduit boxes or panel boxes that have 1/2" trade size conduit KOs. When used with 700 Series Raceway, break out crescent twistout in cover.

Elbow Box Connector Fitting connects raceway at right angles to 1/2" trade size conduit or armored cable connectors. When used with 700 Series Raceway, break out crescent twistout in cover.

EMT Connector Fitting connects 1/2" trade size EMT to 5700 Series rectangular and round device boxes (except 5733). Derates the fill capacity of the EMT. Available quantities: Single Package of 10 Package of 20

Bridge Fitting allows 4000 Series Raceway to cross over existing 2400, 700, or 500 Series Raceway. Color: Ivory.

15A, 125V Single Pole Switch and Box Fitting accommodates other standard single-gang switches in place of furnished standard single pole switch. Cover has twistouts for Model # V500 or Model # V700 on each end. Twistout on ends permits running raceway close to interior...

To feed to or from 500 or 700 Series Raceway on wall to 1500 Series Raceway on floor. Adapter Features: Product Series: 1500, 2600 Component Type: Fittings & Accessories Material: Steel Capacity: Single Channel Ivory Finish

Accepts standard 15 Amp & 20 Amp Duplex Receptacles. Compatible with RFB4 Series Floor Box end compartment only.

500® and 700® Series Extra Deep Device Box is designed for deep devices, providing momentary contact, and remote control switches, hospital signaling system devices, and deep communication devices. Features: 2 3/4" deep box Single gang dimensions - 4 5/8" Tall 2 7/8" wide Double...