Legrand/Wiremold® Nonmetallic Raceway

400 Series Internal Elbow for surfaces at right angles.

Cover Clip – For covering joint where two pieces of 400BAC Series Raceway cover come together.

Shallow Device Box / Extension Box. 2348S-51 Box Features: For shallow switches and receptacles Base has rectangular KO Accepts NEMA Faceplates Dimensions for this device are 4-3/4" H x 3" W x 1" D

For right angel turns around internal corners.

800 Series wire clip for holding conductors in place.

2300BAC Series™ Raceway Tee is designed for branching the raceway running at right angles. Minimum Order Quantity is 5 pieces.

One-piece latching raceway with co-extruded design, smooth plastic finish. Available in 6' [1.8m] and 8' [2.4m] lengths. Dimensions are 1/2" H X 1" W. Sold in packs of 20 for a total of 160'.

One-piece latching raceway with co-extruded design, smooth plastic finish. Dimensions are 3' L X 1/2" H X 1" W.

Cover Clip Fitting covers seam where two pieces of 2800 Series Raceway Cover come together. Available in Ivory and White.

Flat elbow fitting makes right angle turns in 2800 Series Raceway on same surface. Available in Ivory and White.

Tee fitting is for branching of 2800 Series Raceway running at right angles. Available in Ivory and White.

Radiused tee fitting is for branching of 2800 Series Raceway running at right angles. Maintains 1 1/4" [32mm] bend radius when installing UTP and fiber optic cable. Available in Ivory and White.

Internal elbow fitting makes right angle turns around internal corners. Available in Ivory and White.

External elbow fitting makes right angle turns around external corners in 2800 series. Available in Ivory and White.

Drop ceiling connector fitting conceals cables dropped from ceiling into the 2800 Series Raceway. Available in Ivory and White.

Reducing connector fitting is for transitioning from 2800 Series Raceway to 2700 Series Raceway. Available in Ivory and White.

For closing open end of 800BAC Series Raceway. Available in Ivory and White.  Lead time for white is 2 weeks.

CableSmart 40N2 Series 2" Bend Radius Full Capacity External Elbow is a 90° External Corner with integral dividers. External Elbow Features: Provides 2" cable bend radius for UTP and fiber optic installations Ideal for lay-in or pull-through installations Dimensions: 4 1/2" W Available Colors:...

A divided two-gang box for use with 400/800/2300/2300D Series Raceway. Provides the ability to have both power and low voltage at a single point of use. 2344SD-2A Device Box Features: Accepts 5507 Series Faceplates, Ortronics® TracJack & Series II Modules, Pass & Seymour Activate™...

A two-gang extra deep device box fitting for use with 400/800/2300/2300D Series Raceway. Provides the ability to have both power and low voltage at a single point of use. 2344-2 Device Box Features: Base has rectangular KO to enable extension from existing single-gang flush...