Legrand/Wiremold® Steel Raceway

4000 Series® Galvanized Steel Plated Coupling. Coupling Features: Coupling joins lengths of 4000B Raceway Base Each Package contains 2 Coupling Pairs Sold as a Package of 5 Pair and 10 Pair Couplings

4000 Series® Plated Divider Clip. Divider Clip Features: Divider clip required for holding G4000D Divider securely in place Suggested Use: One Clip for every 2 1/2' Sold in Packages of 5 and 10 Clips

500® and 700® Series Flexible Section. Flexible Section Features: Designed for getting around difficult angles End fittings and bulk conduit lengths available Dimension: 18" Maximum painted length 3' Longer lengths furnished unpainted, consult factory for availability

For use as internal or external elbow, straight-through fitting, tee, or cross (one G6001TX required for tee or straight through fitting; two for cross; not included). Usually ships in 10 days.

For holding G6000DA Divider in place to divide raceway into 1/3, 1/2, or 2/3 compartments. 6000 Raceway divided into 1/3 compartments will not accept devices.

500® and 700® Series One-Piece Steel Surface Raceway Device Box. Device Box Features: Designed for deep switches, receptacles and communication devices Base has two 1/2" trade size KOs (Knock Outs) Available in Ivory and White Colors Available Gang Quantity: 1 2 3 4 5...

4000® Series Internal Elbow. Features: 90° internal corners No couplings required

4000® Series Steel Tee divides S4000® Series Raceway at right angles. Features: Only for use with undivided raceway Use two pair of G4001 couplings to attach to raceway (not included)

For vertical mounting single-gang devices on undivided raceway. Accepts commercially available wall plate (sold separately).

2000® Series 90° Flat Elbow Fitting is designed for right angle turns on same surface. Features: For right angle turns on same surface Cover stop permits neat butting of 2000C cover Two couplings furnished Available Colors: Black Gray Ivory Stainless White Available Quantities: Single...

2000® Series Galvanized Steel Coupling joins lengths of 2000® Series raceway base. It is also compatible with Plugmold® 2000 Series™.

2000® Series End Reducing Connector connects 2000® Series Raceway with 500® Series Raceway through the end of 2000® Series Raceway. It is compatible with Plugmold® 2000 Series™.

Use with commercially available two-gang flush plate (sold separately). Works with 6000 and 4000 series raceway systems.

Solid Base Fixture Box is designed to hang fixtures. Features: Cover accepts devices with mounting screw centers of 2 3/4", 3 1/2", and 4 1/16" Four holes for fixture studs Four 1/2" trade size KOs Raised section for no-bolt fixture-stud Available Diameters: 4 3/4"...

2400 Series™ Side Reducing Connector connects 2400 Series™ Raceway with 500® Series Raceway. It is also compatible with Plugmold® 2400 Series™.

2400 Series™ Radiused Internal Elbow. Features: 90° internal corner elbow Provides 2" (51mm) cable bend radius control Designed for fiber optic and UTP/STP cable installations Two couplings included Available Finishes: Fog White Ivory

2400 Series™ Raceway Cover Clip. Features: Seams two lengths of 2400 Series™ Raceway together Compatible with Plugmold® 2400 Series™ Nonmetallic Available Finishes: Fog White Ivory Available Quantities: Package of 5 Package of 10 Package of 25 Package of 50

2400 Series™ Ground Clip. 2409 Features: 2400 Series™ Ground Clip connects equipment grounding conductor to provide ground to 2400 Series™ raceway Number 10 ground screw is provided It is also compatible with Plugmold® 2400 Series™ and Plugmold® 24D Series™ Material: Steel

2000® Series Supporting Clip supports lengths of 2000® series raceway at any point desired. It is also compatible with Plugmold® 2000 Series™. Features: Mounts to surface with Number 6 flathead screw Available Colors: Gray Ivory

2000® Series Steel Raceway Tee branches at right angles. The couplings are furnished.