Middle Atlantic Racks & Cabinets

OSR series racks feature a gently sloped 5 degrees rack face to facilitate equipment viewing. Features: Depth at top: 19-1/2" Depth at bottom: 23" 3/4" oak laminate construction Includees casters to enhance mobility Factory-installed 11-gauge, 10-32 threaded front rackrail is standard

Quickly and inexpensively organize desktop processing and test equipment with Middle Atlantic's DR series desktop rail racks. Features: Offered in 8 and 12 space size Extend upward at a gentle slope Overall Width: 19-1/8" Overall Depth: 11-1/2" Weight Capacity: 75 lbs. Note: Both space...

Additional 10-32 threaded rackrail. Sold in pairs.

Specify an SBX when seeking an economical solution for wall mounting smaller systems. Features: Removable backpan simplifies installation and provides easy access to equipment connections Fully welded center section utilizes 18-gauge steel, backpan constructed from 14-gauge steel Locking front door swings pen a full...

Under desk / mobile presentation rack features Glide-Away front door and an ergonomic viewing angle. Features: Rolls under all standard height desks 5 degree slope provides an ergonomic viewing angle when used under-desk Scuff Resistant Glide-Away front door easily hides away, and requires minimal...

Furniture grade, graphite finish work surface for use with ISRK presentation rack (WS1-ISRK-21). Features: Knockout for optional LCD mount (LD-AM1X1) Dimensions: 25.4" x 21.2"

Our crating service offers reusable and economical transport protection for any of our steel rack enclosures. Time-saving design includes removable front and rear panels, allowing loading and testing of racks while still in the crate. Common carrier tested, our crates ensure that racks and...

The MDV-CNR1 Corner Desk includes a one piece overbridge that is user-configurable.  Usually ships in 2-4 days.  Additional shipping charges may apply.  You will be contacted if necessary. Features: Three user-configurable ways: One 4 space rackbay in center Two 4 space rackbay on sides...

The MDV-CNR3 Corner Desk includes a three piece overbridge specifically designed to accommodate mixers with tall meter bridges. The overbridge center section is user-configurable. Features: Two user configurable ways: 11 1/4" inside height clearance 16 1/2" inside height clearance Center section provides 30" inside...

Featuring a 59" wide footprint, and includes a large one piece overbridge that is set 6" above the desktop for ergonomic viewing. The sturdy steel-tube leg set provides a standard 28-1/2" desktop height, allowing the MDV-DL tube used with either the Edit Center line...

The MDV-DSK Straight Desk includes an overbridge that is user-configurable two ways. Features: Two user-configurable ways: Two 4 space rackbays, or Remove center section to accommodate mixers up to 39" wide Overbridge provides 7" inside height clearance

Cabinet Cooler removes heat generated by components located in smaller cabinets and entertainment centers. Cooler Features: Operating only when needed to minimize dust, this quiet cooling device features an aesthetically designed vent that can be painted to match its environment The quiet, internal fan...

Closet Cooler. Closet Cooler Features: Remove heat generated by components located in smaller cabinets and entertainment centers Operating only when needed to minimize dust, this quiet cooling device features an aesthetically designed vent that can be painted to match its environment The quiet, internal...

Rear Rackrail RK Series Laminate Racks 16" Deep Features: Sold in pairs Compatible with the RK/BRK series cabinets ENHANCED High-quality black woodgrain laminate finish Easily assembled with included hex key and hardware

CFR 14 Space Cabinet Frame Rack (CFR) is designed to provide rackspace in cabinets, credenzas, podiums, lecterns, and other pre-built structures. Cabinet Frame Rack Features: Low profile design maximizes amount of usable rackspace 14 Space CFR has an Overall Height of 25 7/16" and...

CFR 8 Space Cabinet Frame Rack (CFR) is designed to provide rackspace in cabinets, credenzas, podiums, lecterns, and other pre-built structures. Cabinet Frame Rack Features: Low profile design maximizes amount of usable rackspace 8 Space CFR has an Overall Height of 14 15/16" and...

CFR 9 Space Cabinet Frame Rack (CFR) is designed to provide rackspace in cabinets, credenzas, podiums, lecterns, and other pre-built structures. Cabinet Frame Rack Features: Low profile design maximizes amount of usable rackspace 9 Space CFR has an Overall Height of 16 11/16" and...

CFR 10 Space Cabinet Frame Rack (CFR) is designed to provide rackspace in cabinets, credenzas, podiums, lecterns, and other pre-built structures. Cabinet Frame Rack Features: Low profile design maximizes amount of usable rackspace 10 Space CFR has an Overall Height of 18 7/16" and...

CFR 11 Space Cabinet Frame Rack (CFR) is designed to provide rackspace in cabinets, credenzas, podiums, lecterns, and other pre-built structures. Cabinet Frame Rack Features: Low profile design maximizes amount of usable rackspace 11 Space CFR has an Overall Height of 20 3/16" and...

CFR 12 Space Cabinet Frame Rack (CFR) is designed to provide rackspace in cabinets, credenzas, podiums, lecterns, and other pre-built structures. Cabinet Frame Rack Features: Low profile design maximizes amount of usable rackspace 12 Space CFR has an Overall Height of 21 15/16" and...