Panduit® Fiber-Duct Routing System

The FIBER-DUCT 2x2 and 4x4 Routing Systems are comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic cable and copper cabling. It is suited for data center applications where cable is routed from distribution areas to equipment cabinets or...

Fiber-Duct RoutingSystem is a complete fiber optic cable routing system. This system can be used for all fiber optic cable routing installations. The specially designed fittings feature a minimum 2" bend radius to protect fiber optic cables. Cover Sold Separately: Model # C1LG6 Slotted...

Coupler Fitting is used to join two sections of duct together. Fiber-Duct Coupler is not required at each fitting connection. Fitting Features: Fittings include 5/16" assembly holes for fast Mechanical fastening Compatible with PANDUIT NR2WH-L and NR4BL-L Snap Rivets Fitting Size: 4x4 RoHS Compliant...

Used for closing off open ends of the channel. No coupler required. Push-on installation. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with PANDUIT NR2WH-L or NR4BL-L Snap Rivets RoHS Compliant

Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 45° angle fitting FIV452X2BL or FIV454X4BL to change level of straight horizontal runs. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use...

Used to support the 2x2 and 4x4 Fiber-Duct Systems attaching directly to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. No threaded rod required. Contains hardware for mounting channel to bracket. Features: System Size: 2x2 or...

QUIK LOCK Ladder Rack Bracket. Used to support the 6x4 and 4x4 systems attaching directly to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. No threaded rod required. The pre-assembled slide clamps enable fast assembly to...

Snap-Clip Mounting Bracket for use with Duct Types G, F, FS, and D. Features: Duct easily snaps into bracket No mounting holes required in duct Ensures no metal is inside the duct Snap-clip spacing is not critical Simplifies fabrication drawings and panel layout Self...

12x4 Horizontal right angle fitting attaches to 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal right angles. Accepts optional split cover FRRASC12. Features: bend radius control to prevent excessive...

Optional split cover for the horizontal right angle fitting FRRA12X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to add or remove cables. Features: Minimum 2" (50.8mm) bend radius control fittings...

Used to support 2x2 and 4x4 Fiber-Duct Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket. Bracket Features: Material: Steel System Size: 2x2 and 4x4 RoHS Compliant

EIA/TIA Threaded Rod Mounting Bracket provides a vertical threaded rod stud to mount FiberRunner and fiber-duct threaded rod mounting brackets onto. Features: Bracket consists of two identical components that clamp onto crossmembers of standard EIA/TIA racks Secured with standard hex nuts and split lockwashers...

Type FS Solid Wall PVC Raceway is ideal for use in non-plenum applications including under floor and telecommunication closet installations. Cover Sold Separately: Model # C1LG6 FS4X2WH6NM Features: Solid wall design fully encloses cables providing maximum protection and aesthetics Base scoreline allows full wire...

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Features: Bracket is secured to threaded rod with...

Optional split cover for the horizontal right angle fitting FRRA6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to add or remove cables. Features: Minimum 2" (50.8mm) bend radius control fittings...

Fiber Duct Fitting attaches to channel to create a horizontal four way cross intersection. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with Panduit® NR2WH-L or NR4BL-L snap rivets Attaches to channel to create a horizontal four way cross...