Surface Raceway Equipment

2300D Series Radiused Divided Flat Elbow. Features: 90° internal corner with integral dividers Provides 2" cable bend radius for UTP and fiber optic installations Available Finishes: Ivory White

2300D Series Radiused Divided Entrance End Fitting is a divided fitting designed to feed 2300 and 2300D Series Raceway. Features: Includes 1/2", 3/4", and 1" trade size knockouts on back and top Available Finishes: Ivory White

2300D Series Radiused Divided Internal Elbow. 2317DFO Features: 90° internal corner with integral dividers Provides 2" cable bend radius for UTP and fiber optic installations Available Finishes: Ivory White

1" wide Wire clips will hold conductors in place. Pack of 50

800 Series™ Clip Cover is designed for covering the joint where the two pieces of 800 Series™ Raceway Base (Model #: 800BAC) and 800 Series™ Raceway Cover (Model #: 800BAC) come together. It is available in ivory and white finish.

Eclipse™ PN03, PN05, PN10 Series Drop Ceiling Connector is designed for dropping cables from ceiling into the raceway Features: Drops cables from ceiling into raceway Has 1/2" and 3/4" concentric trade size KOs Includes PN153R reducer adapter for use with PN03 Series Raceway Available...

Wiremold Open Systems 2A communications module table source unit with 12 ft cord set.

Plugmold® 2000 Series™ 6' Steel Power Strip with 6 Outlets. Minimum Ordering Specifics:'Package of 2' Ordering Quantity is only Available if 'In Stock'. Please call for updated Inventory Status. 'Package of 10' can always be Ordered. BK20GB612 Features: Distance Between Outlets: 12" NEMA 5-15R...

For branches at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included.

Plugmold Plus NM2000 Series™ Deep Device Box. Features: Cover snaps onto base - no screws required Cover has twistouts on all sides Rectangular KO in base for extenstion to wall box Used with 2700, 2800, 2900 and NM2000 Series Raceways 4 3/4" L x...

Single Receptacle Cover Plate 1.59" [40mm] diameter. ALA-F Features: For installation of commercially available straight blade and locking single receptacle with face diameters of 1.56-1.58 [38mm-39mm] All device plates are 12 Inch L x 3 Inch W [76mm x 305mm] These parts are compatible...

ALA3800 Series Blank End Cap. ALA3810B End Cap Features: Designed for closing off open ends of ALA3800 Series Raceway Insert fitting into end of raceway base - secure in place by tightening two screws Sold in Packages of 5 and 10 End Caps

Joins lengths of inline ALA3800B-10 Racway Base together. ALA01 Coupling Features: Connects adjoining sections of ALA3800 Series Raceway base Sold in Packages of 5 and 10 Couplings Product Series: ALA3800 Component Type: Fittings & Accessories Material: Aluminum Capacity: Single Channel

ALA3800 Series Single Receptacle Cover Plate. ALA-E Features: 1.40" [35.40mm] ALA3800 Series Single Receptacle Cover Plate installs commercially available straight blade and locking single receptacle with face diameters of 1.38" - 1.39" [36mm - 37mm]. Available Quantities: Single Package of 2 Package of 10...

ALA3800 Series Aluminum Raceway System meets the demands of commercial spaces, providing a handsome and effective method of directing power or communications services where required. Standard box is 40'. ALAC-5 Cover Features: Nominal wall thickness of 0.078" Satin Anodized finish

ALA3800 Series Single Compartment Raceway Base. ALA3800B-10 Raceway Base Features: Satin anodized finish Nominal Wall Thickness: 0.078" Sold in 10' lengths packaged 4 per carton, totaling 40' of raceway

Eclipse™ PN03, PN05, PN10 Series Cover Clip for covering joint where two pieces of Eclipse PN03, PN05, or PN10 series raceway cover come together. Features: Covers joint where two pieces of Eclipse PN03, PN05, or PN10 series raceway cover come together Sold in packages...

Eclipse™ PN03, PN05, PN10 Series Blank End Fitting is designed for closing open ends of Eclipse PN03, PN05, or PN10 series raceway. Features: Closes open ends of Eclipse PN03, PN05, or PN10 series raceway Available End Fittings: PN03 PN05 PN10 Available Colors: Fog White...

Wire Clip – For holding conductors in place.

400 Series Internal Elbow for surfaces at right angles.