panduit®
-
Controlled cycle crimp tool with trapezoid profile for Panduit #4 – 2 AWG (26.0 – 35.0mm²) insulated and non-insulated ferrules.
- $373.04
- $373.04
- Unit price
- per
-
Contour Crimp Controlled Cycle Tools. Ships in 2 weeks. Crimp Tool Features: Specifically designed for the installation of Pan-Term® terminals, disconnects, and splices Controlled cycle mechanism assures high quality, consistent terminations Ergonomic tool design assures operator comfort, safety, and performance Polypropylene handles provide chemical...
- $469.49
- $469.49
- Unit price
- per
-
Crimps most Pan-Term® #22 – #10 AWG nylon and vinyl insulated terminals, splices, and disconnects. Insulated Terminal Features: Specifically designed for the installation of Pan-Term® terminals, disconnects, and splices Controlled cycle mechanism assures high quality, consistent terminations Ergonomic tool design assures operator comfort, safety,...
- $447.54
- $447.54
- Unit price
- per
-
Crimps PANDUIT #8-#2 AWG non-insulated large gauge ring terminal (P series). Includes 5 position rotating die. Features: Contour Crimp - crimping tools ergonomically designed to dramatically reduce stress in hand and wrist Controlled cycle crimp mechanism assures a full crimp cycle for reliable terminations...
- $311.65
- $311.65
- Unit price
- per
-
Duct with front mount bracket. Features: For managing cable within cabinets 27" (685mm) or wider Easy to install to cabinet vertical mounting rails Two mounting bracket options to facilitate mounting to various cabinet configurations Snap-on Covers included
- $260.66
- $260.66
- Unit price
- per
-
Duct with side mount bracket, cage nut and screws. Dimensions 2"W x 4"D x 72"H (51mm x 102mm x 1829mm) .187 Dia. cable capacity = 60. Features: For managing cable within cabinets 27" (685mm) or wider Attach to equipment mounting rails Easy to install...
- $317.99
- $317.99
- Unit price
- per
-
Duct with front mount bracket. Features: For managing cable within cabinets 27" (685mm) or wider Attach to equipment mounting rails Easy to install to cabinet vertical mounting rails Two mounting bracket options to facilitate mounting to various cabinet configurations Snap-on Covers included
- $289.41
- $289.41
- Unit price
- per
-
"H" Duct with side mount bracket, cage nut and screws. Dimensions: 71.9"H x 3.5"W x 4.3"D (1825mm x 88mm x 109mm) Features: Cable Capacity - Cat 5e (.187) Cable Capacity - Cat 6 (.250) Cable Capacity - Fiber (3mm) No. of Rack Spaces 40...
- $360.00
- $360.00
- Unit price
- per
-
Copper wire snipping tool. Features: EGJT tool assists in terminating all enhanced Giga-TX™ Style Jack Modules by ensuring conductors are fully terminated by utilizing smooth forward motion without impact on critical internal components for maximum reliability CJT-X tool assists in terminating all Mini-Com®Mini-Jack™ Jack...
- $52.33
- $52.33
- Unit price
- per
-
Non-Insulated female receptacles. Sleeved barrel provides excellent wire retention. Features: Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping Barrel of terminal...
- $55.80
- $55.80
- Unit price
- per
-
Ceiling - Entrance end fitting for LD series raceways. DCEFXIW-X Features: Power Rated Fittings for Power to 600V & 1" Bend Radius Fittings One Inch Bend Radius Fittings are designed to maintain the TIA/EIA 568-B and 569-A required minimum bend radius for high performance...
- From $12.95
- From $12.95
- Unit price
- per
-
Off White
-
Electric Ivory
-
International Gray
-
Drop Ceiling/Entrance End Fitting for use with LD10 raceway. Low voltage standard fittings (data only applications under 48V).
- From $4.97
- From $4.97
- Unit price
- per
-
Off White
-
Electric Ivory
-
International Gray
-
Drop Ceiling/Entrance End Fitting for use with LD5 raceway.
- From $4.59
- From $4.59
- Unit price
- per
-
Electric Ivory
-
Heavy duty steel tool incorporates a new, improved blade design, which minimizes cutting force and blade wear. Provides a smooth burr-free cut on both wiring duct and cover. Features: Easily cuts any PANDUCT duct and cover
- $147.63
- $147.63
- Unit price
- per
-
Duct Finger Cutting Tool. Features: Easily removes duct fingers in tight places For use with all slotted wiring duct
- $112.10
- $112.10
- Unit price
- per
-
Wire Ducting Joining Strip. DJSP2LG-Q Features: Slides onto duct to join sections together Available in four pre-cut sizes that can be cut-to-size to meet any size requirement Easy to install one-piece design Compatible with all styles of Panduit® wiring duct Made of rigid, light...
- From $58.28
- From $58.28
- Unit price
- per
-
Right Angle Female Disconnect, Nylon Fully Insulated (Package of 50). Funnel entry, 16 – 14 AWG, .250 x .032 tab size. Features: Right angle design for use in limited space applications Fully insulated design provides protection from electrical shorts Internal wire stop assures proper...
- $46.85
- $46.85
- Unit price
- per
-
Hand-Held Sidewall Notching Tool is a heavy-duty tool used to notch slotted wall wiring duct from the bottom of a slot to the base of the duct. Features: Notches duct sidewalls to bottom scoreline for tee and corner junctions For use with all slotted...
- $159.59
- $159.59
- Unit price
- per
-
12-Port Patch Panel 8 position, 8 wire GP6 PLUS style punchdown patch panel. Patch Panel Features: Exceed ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications Each port is 100% tested to ensure...
- $110.30
- $110.30
- Unit price
- per
-
12-Port Patch Panel 8 position, 8 wire GP6 PLUS style punchdown patch panel. Patch Panel Features: Mounts to 89D bracket Designed to meet TIA/EIA-568-B.2-1 Category 6 standard ETL tested and approved for Category 6 component compliance Angled version available which allows cable to flow...
- $130.41
- $130.41
- Unit price
- per
