panduit®

Flexible vinyl material used to route single cable over carpet, tile and concrete. Available in 6 or 50 ft roll with mounting tape. Available in EI (Electric Ivory), BR (Brown), YL (Safety Yellow) and BL (Black). Features: Accessory to route cables over carpet, concrete,...

Flexible vinyl material used to route cabling over carpet, tile and concrete with pre-applied mounting tape. Available in 30 or 50 ft. roll. Features: Accessory to route cables over carpet, concrete, or tile to prevent tripping Flexible vinyl material can be easily cut to...

Flexible vinyl material used to route cabling over carpet, tile, and concrete. FG5BL25-0-A Features: Accessory to route cables over carpet, concrete, or tile to prevent tripping Flexible vinyl material can be easily cut to specific lengths Cables route through underside of product RoHS Compliant...

2x2 End Cap Fitting is used for closing off open ends of the hinged channel or fittings. End Cap Fitting Features: Bend radius control to prevent excessive bends in high performance copper and fiber optic cabling Minimum 2" bend radius control fittings Protects against...

The FiberRunner® 2x2 Horizontal Right-Angle Fitting attaches to a channel to create a 90° horizontal turn from a straight horizontal run. The cover is included. Lead time is 4-6 weeks.

1-Port Spillout to 1.5" Inside Diameter Corrugated Tubing is used for routing cable. 1-Port Spillout Features: Routes cable into one piece of 1.5" (38mm) diameter split corrugated tubing Used with FiberRunner Spill-Over FRSPYL, 2x2 Fiber-Duct Fittings, and the 2x2 FiberRunner Hinged Channel Securely holds...

Used to route cable into one or two pieces of 1.5" (38mm) diameter split corrugated tubing. Used with FRVT6X4YL, FRVT4X4YL, or FVT4X4YL. Securely holds corrugated split tubing to ensure system integrity and easy access to add or remove cables. Black color only FIDT4X4BL Features:...

Panduit® FieldKit. Package Content: (1) FKITCASE Case for fiber termination kits (1) CST115 Fiber cable jacket stripper (1) FALC Alcohol bottle (empty) (1) FBFSP Fiber buffer stripper (1) FSCDVR Screwdriver (1) FGLS Safety glasses (1) FTWZER Tweezers (1) FWBTL Water bottle (empty) (1) FKS...

Field Polish Kits. Package Content: (10) FSYR-X Syringes with needle tips (1) FPWIRE Piano wire (1 pkg.) LJSL4-Y3-2.5 Cable labels (1) FJPMR Primer (50ml) (1) FJPXY Anaerobic adhesive (10ml) (50) FPP5-L 5μm polishing paper (AL2O3) (5) FPF1-V 1μm diamond polishing film (10) FLCFPLF-X 0.05μm...

Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2YL or FOVRA4X4YL to change level of straight horizontal runs. Cover included. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use...

Inside Vertical Right Angle Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90 deg. angle fitting FOVRA2X2YL or FOVRA4X4YL to change level of straight horizontal runs. Cover included. Features: Fittings include 5/16" assembly...

FJ multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900um buffered fiber installation. 62.5/125um / 50/125um Compatible. Features: TIA/EIA-604 FOCIS-6 compliant connectors Exceed TIA/EIA-568-B.3 requirements Insertion loss: .1dB typical (multimode), .2dB typical (singlemode) Return loss: >20dB...

FJ Keyed multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900um buffered fiber installation. Features: Fiber Cable Size: 3mm or 900um Fiber Cable Type: Tight-buffered recommended Fiber Compatibility: 62.5/125um / 50/125um

FJ Keyed multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900um buffered fiber installation. Features: Fiber Cable Size: 3mm or 900um Fiber Cable Type: Tight-buffered recommended Fiber Compatibility: 62.5/125um / 50/125um

FJ Keyed multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900um buffered fiber installation. Features: Fiber Cable Size: 3mm or 900um Fiber Cable Type: Tight-buffered recommended Fiber Compatibility: 62.5/125um / 50/125um

FJ Keyed multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900um buffered fiber installation. Features: Fiber Cable Size: 3mm or 900um Fiber Cable Type: Tight-buffered recommended Fiber Compatibility: 62.5/125um / 50/125um

FJ Single-mode duplex fiber optic jack module with zirconia ceramic split sleeves for 3.0mm jacketed cable or 900μm buffered fiber installation. Features: TIA/EIA-604 FOCIS-6 compliant connectors Exceed TIA/EIA-568-B.3 requirements Insertion loss: .1dB typical (multimode), .2dB typical (singlemode) Return loss: >20dB (multimode), >40dB (singlemode) RJ45...

FJ Opti-Crimp 50/125μm multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900μm tight-buffered fiber installation. Features: TIA/EIA-604 FOCIS-6 compliant connectors Exceed TIA/EIA-568-B.3 requirements Insertion loss: >3dB typical (50/125μm) Return loss: >20dB Pre-polished mechanical crimp termination eliminates...

FJ Opti-Crimp 62.5/125μm multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900μm tight-buffered fiber installation. Features: TIA/EIA-604 FOCIS-6 compliant connectors Exceed TIA/EIA-568-B.3 requirements Insertion loss: >3dB typical (62.5/125μm), .35dB typical (50/125μm) Return loss: >20dB Pre-polished mechanical...

FJ Opti-Crimp 62.5/125um keyed (W) multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacket cable or 900um tight-buffered fiber installation. Features: Fiber Cable Size: 3mm or 900um Fiber Cable Type: Tight-buffered only Fiber Compatibility: 62.5/125um