bogen

12V Power supply for PCM2000 (one required per CPU module). PCMPS2 Features: Output: 12V DC @ 1.5A 120V AC Input Style: Plug-in Output Connections: Barrel Connector Dimensions: 2-5/8" W x 3-3/8" H x 2-7/8" D

Pre-Assembled PCM Paging System. Includes PCMPS2 - System Power Supply. PCMSYS3 Features: PCMZPM Zone Paging Module: Three zones of paging Can operate high-power or low-power paging systems (Only 1 type per PCMZPM module) A single amplifier can be used for paging and supplying background...

Steel Speaker Grille protects and conceals recessed 8" ceiling speakers. They are shipped complete with the hardware needed to mount a speaker to the grille. PG8W Features: Available in bright white or off-white finish Protects and conceals 8" speakers Constructed of steel

Intercom Desktop Control Center provides instantaneous intercommunication and background music (or other program) distribution facilities for up to 25 speaker-equipped stations. Ships in 2 weeks. Control Center Features: Cost-effective communication with 25 staff stations Step-by-step instructions and color-coded guidelines for easy operation Instant emergency/all...

ProMatrix Digitally Matrixed Amplifier was developed for the needs of businesses that require multiple program and paging inputs need to be distributed to separate areas and automatically switched. PM3180 Features: 20, 60, 100 watt amplifier channels 8-ohm, 70V, and 25V outputs on each amp...

12V Power Supply provides 12V DC at 300 mA, as required for various telephone paging access devices. PRS40C Features: Rugged and versatile Input: 120V AC, 60 Hz, 8W Input Style: Plug-in Output: 12V DC, 300 mA Unregulated Output Connections: Barrel Connector Dimensions: 2" W...

48V Power Supply provides 48V DC at 100 mA, as required for various telephone paging access devices. PRS48 Features: Rugged and versatile Input: 120V AC, 60 Hz, 24W Input Style: Plug-in Output: 48V DC, 100 mA Regulated Output Connection: Screw Terminals Dimensions: 2-1/2" W...

Loop Start Interface Power Supply functions as both a loop start interface and as a 24V DC power supply. It includes Tip and Ring terminals for connection to a loop start trunk to provide paging access and enough audio capacity to drive up to...

N.E.A.R. 64 Watt / 70V Sandstone Rock Landscape Speaker is a completely weatherproof speaker that looks and is textured to feel like a rock, making it perfect for outdoor installations where a natural scenic appearance is important. Features: Wide Coverage: Allow speakers to be...

Steel Enclosure for 8" Ceiling Speaker is a protective enclosure for an 8" speaker. Features: Protective enclosure for 8" speaker in recessed installations One-piece steel construction includes mounting ring and foam insert to reduce metallic resonance Finished in rust-resistant primer For use with any...

Rack Mounting Kit. RK78 Features: Rack Mounting Kit for CR-100 in SI-35 Rack Mounting Kit for CDR1

Remote Wall Mounting Kit is ideal for use with PM3000 and PM3180. RMPWMK3 Features: Remotely mount front panel up to 250 feet from unit 9-1/8" W x 4-3/4" H x 3/4" D

Rack Panel Mounting Kit is ideal for use with Bogen's C10 and C20 Watt Classic Series Amplifier, as well as Bogen's Mixer / Pre-Amplifier. RPK35B Features: 2 Rack Spaces High Dimensions: 19" W x 3-1/2" H x 6-1/2" D

Rack Panel Mounting Kit for Bogen's 35W, 60W, and 100W Classic Series Amplifiers. RPK50 Features: 2 Rack Spaces High Dimensions: 2-1/2" W x 3-1/2" H x 2-1/8" D

Rack Mount Kit. RPK53 Features: 2 Rack Spaces High 2" W x 3-1/2" H x 1" D

Rack Mount Kit for TPU35B, TPU60B, and TPU100B. RPK82 Features: 5 Rack Spaces High 3" W x 8-3/4" H

Rack Mount Kit for the PCM2000. Features: 4 rack spaces high Accommodates all configurations of PCM2000 7" (W) x 8" (H) Ships in 7-10 days.

Rack Mount Kit for Bogen's Power Vector Amplifiers. RPK87 Features: 2 Rack Spaces High 1" W x 3-1/2" H x 3-3/4" D

Rack Mounting Kit for PCM2000. Features: 6 rack spaces high Accommodates all configurations of PCM2000 10-1/2" (H) x 19" (W) x 2" (D)

Double receiver rack mount kits are use to allow a two receiver units to be mounted in a rack.