Legrand - Wiremold 881 881 Series Ratchet-Pro Multi-Service Round Floor Box

The Walker Ratchet-Pro PVC Floor Box provides dual-service capability in a single, easy-to-install round floor box. This design allows the flexibility of providing power and communications to open-space areas in one aesthetic package. Applications include malls, shopping centers, department stores, airports, hospitals, and office buildings. This box is UL/cUL Listed for both grade and above grade concrete construction.

Floor Box Features:

• TopGuard protection keeps out water, dirt, and debris from the power or communication compartment. Meets and exceeds the new UL scrub water exclusion requirement.
• UL Listed to U.S. and Canadian safety standards for tile, terrazzo, and the future UL requirements under UL514A and UL514C for scrub water exclusion test for carpet and wood floors.
• Ratchet adjusting ring allows for quick and easy installation without gluing, as well as removal of cover to activate at a future date for dual service (Conduits must already be connected). 10° of flexible adjustment allows cover to conform to the surface of the concrete pour, which significantly reduces labor costs.
• Parallel conduit hubs allows for conduit feeds to be parallel for both power and communication cables. Reduces labor and material costs by eliminating the need for 90° bends and allows for easier wire pulling for dual-service.
• Graduated cubic inch markings on interior of the box.
• Corresponding graduated cubic inch markings on divider. Labor savings provided by easy separation of services. Individual compartment capacities are indicated.
• Four 1" [25mm] conduit hubs. Greater capacity allowed by larger conduit hubs.
• Individual conduit reducers and conduit plugs. Reduction in labor costs by supplying direct reduction for 1/2" and 3/4" [12.7 and 19.1mm] conduits.Reducers and plugs are separate.
• Streamlined design of divider. Labor savings from ease of cutting using a utility knife, no hacksaw or tape measure needed. Also allows for more room to splice wires.
• "Dead-Front" protection with the 897CTC Series and the 881CTC Series Covers. Slide covers snap back into place when receptacle is not in use to prevent dirt and debris from entering device.