25v/70v Amplifiers and Power Supplies

Bogen General Purpose Amplifier supplies 60 watts of power amplification for professional and commercial sound systems. Ships in 2 weeks. BPA60 Features: 60 watts Distortion less than 2% THD Transient protection diodes Frequency response -2dB from 20Hz to 20kHz Multiple output voltages/impedances available Resettable...

10 Watt Classic Series Amplifier provides mixing of microphones, telephone, and auxiliary sources. It is designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages. C10 Features: 10 watt outlet power Transformer isolated 4Ω, 8Ω, 16Ω, 25V and 70V output...

100 Watt Classic Series Amplifier is a public address mixer that provides mixing of microphones, telephone, and auxiliary sources. C100 Features: 100 watt outlet power 4 inputs:1 MIC (Lo-Z),1 AUX (Hi-Z), 1 TEL, and 1 selectable MIC or AUX Each input controlled by an...

20 Watt Classic Series Amplifier provides mixing of microphones, telephone, and auxiliary sources. It is designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages. C20 Features: 20 watt outlet power Transformer isolated 4Ω, 8Ω, 16Ω, 25V and 70V output...

35 Watt Classic Series Amplifier is a public address mixer that provides mixing of microphones, telephone, and auxiliary sources. C35 Features: 35 watt outlet power 4 inputs:1 MIC (Lo-Z),1 AUX (Hi-Z), 1 TEL, and 1 selectable MIC or AUX Each input controlled by an...

60 Watt Classic Series Amplifier is a public address mixer that provides mixing of microphones, telephone, and auxiliary sources. C60 Features: 60 watt outlet power 4 inputs:1 MIC (Lo-Z),1 AUX (Hi-Z), 1 TEL, and 1 selectable MIC or AUX Each input controlled by an...

Remote Volume Control is ideal for use with Bogen's Gold Seal Series Amplifiers. Ships in 1 week.

125-Watt Mono-Channel Power Amplifier is a high-performance power amplifier that can safely drive loads continuously at full (RMS) power in ambient temperatures of up to 120 degrees F. HTA-125A Features: 125 Watt model Designed for continuous operation at rated power up to 120 degrees...

250-Watt Mono-Channel Power Amplifier can safely drive loads continuously at full (RMS) power in ambient temperatures of up to 120 degrees F. HTA-250A Features: 250 watt model Designed for continuous operation at rated power up to 120 degrees F Convection-cooled Power MOSFET output circuitry...

Call-In Module is an annunciator latching control bank designed for use with room selector panels in Multi-Graphic systems. The silicon controlled rectifiers provide annunciator latching, keeping the appropriate LED annunciator lamp on the room selector panel illuminated until the call is acknowledged. Features: Provides...

250-Watt Phone Paging Amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page. TPU-250 Features: Night Ringer: Sends an electronic ringing tone signal through all speakers, alerting...

The V-1095 allows expansion of an existing centrally amplified system using Valcom one-way speaker/amplifier assemblies. The expander works on 8 ohm, 25 Volt, 70 Volt or 100 Volt systems.The expander features a stainless steel plate with embossed numbers and fits a single gang electrical...

35-Watt Phone Paging Amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page. TPU-35B Features: Night Ringer: Sends an electronic ringing tone signal through all speakers, alerting...

60-Watt Phone Paging Amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page. TPU-60B Features: Night Ringer: Sends an electronic ringing tone signal through all speakers, alerting...

100-Watt Phone Paging Amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.  Ships in 7-10 days. TPU-100B Features: Night Ringer: Sends an electronic ringing tone signal...

Beam Clamp for Bogen's horn loudspeakers. Dimensions: 2-1/8" (W) x 2" (H) x 3/4" (D)

15-Watt Phone Paging Amplifier is the ideal choice within the telephone paging industry. This 15-watt paging amplifier provides signal-activated, automatic muting of background music during a telephone page, and gradual return of music following a page. TPU15A 15-Watt Phone Amplifier Features: Compact wall-mount design...

Rack Mount Kit for the PCM2000. Features: 4 rack spaces high Accommodates all configurations of PCM2000 7" (W) x 8" (H) Ships in 7-10 days.

Rack Mount Kit for Bogen's Power Vector Amplifiers. RPK87 Features: 2 Rack Spaces High 1" W x 3-1/2" H x 3-3/4" D

The VP-12124 is a fully regulated 24VDC, 12 Amp switching power supply. The primary is protected by a 6.3 Amp fuse and the two amp outputs by auto-resetting fuses. The outputs are floating with respect to ground. The regulator will maintain 24 volts +/-2%...