Cable Supports, Clips, Clamps

Fits all strut 1-5/8" (41 mm) wide.

Fits all strut 1-5/8" (41 mm) wide. Available in packages of 100. Features: 1/4"-20 thread impression Requires only a screwdriver to install, adjust or remove Eliminates nuts and bolts The CADDY combination washer-wing nut (Cat. No. 4WN) can be used to attach box or...

Fits all strut 1-5/8" (41 mm) wide. Available in packages of 100. Features: Available with a 1/4"-20 staked stud 5/8" Requires only a screwdriver to install, adjust or remove Eliminates nuts and bolts The CADDY combination washer-wing nut (Cat. No. 4WN) can be used...

Traditional spring nuts are dependent on strut depths. The SLICK nut has eliminated the spring and easily fits all standard strut depths. They are available in 1/4"-20, 3/8"-16 and 1/2"-12 sizes. Features: Quick attachment of threaded rod and hardware to all standard strut -...

The STS Clamp eliminates additional attachments to building structure by permitting quick attachment to existing strut trapeze. Features: Fast assembly of half-slot strut into back-to-back strut Alternative to welded strut or traditional hardware (nuts, bolt and washers) Allows dissimilar half-slot channel to be joined,...

Available in two sizes, 3/8 and 1/2. Features: Box of 100 Electro-Galvanized Finish

Threaded Rod is available in three sizes, 1/4" x 10', 3/8" x 10' & 1/2" x 10'. The Threaded Rods have a Electro-Galvanized finish. Comes in a box of 50.

The Easy Strut Clip is the ideal solution for retrofit and add-on installations since it uses the existing strut framework. Features: Works on any industry standard strut profile Provides fast attachment of a 1/4" mounting hole, J-Hook, cable, conduit or 1/4" threaded rod to...

The Cable Support Hanger has a J-Hook angle bracket and is pre-riveted for easy assembly. Features: Longer leg angle bracket for tool clearance Improved for easier installation with pin drivers Star hole provides more gripping power to align brackets Static load limit of 50...

The Cable Support Hanger is designed to fit a variety of pin drivers. Features: Longer leg angle bracket for tool clearance Improved for easier installation with pin drivers Star hole provides more gripping power to align brackets Pregalvanized steel Holds up to 16 cables...

The Pin Driven Angle Brackets are designed to fit a variety of pin drivers. Features: Longer leg angle bracket for tool clearance Improved for easier installation with pin drivers Star hole provides more gripping power to align brackets Pregalvanized steel Box of 50

Fits open web joists with round bottom chords. Features: Permits absolute centering Eliminates offset bending conduit Available in two configurations: For threaded rods 3/8" and smaller, nuts required For threaded rods or bolts, 1/4"-20 thread impression Box of 100

Eliminates the use of nut and allows the use of plain rod. Features: No installation tools required Box of 100 Available in three sizes: #8 wire, Static Load Limit 100 lbs. thru 3/8" hole 1/4" plain rod, Static Load Limit 100 lbs. thru 3/8"...

The ISN Smart Nut is ideal when rod ends are not accessible or for retrofit applications. Features: Snaps anywhere on 3/8-16 threaded rod Adjustable and removable Eliminates excessive threading into place Supports plumbing, HVAC, electrical Reduces installation time

The ISSP/ISN Strut Plate Kit eliminates precise cutting of strut and the need for multiple hardware pieces. ISSPK Features: Allows for easy attachment of strut between existing rods For commercial and industrial applications Bolt has locking design to prevent loosening due to vibration This...

Box of 100 ISSP Strut Plates. Strut Plate Features: Allows for easy attachment of strut between existing rods Eliminates precise cutting of strut and the need for multiple hardware pieces Bolt has "locking design" to eliminate loosening or "backing off" due to vibration

Positive locking through deck tab. Prevents twisting or loosening due to vibration. Features: Designed to support #8 wire, 1/4" or 3/8" plain rod, 1/4" or 3/8" threaded rod (with or without nuts) and 1" wide strap from Cellular Floors with hanger tabs Box of...

The Deck Hanger is for attaching fasteners to deck. Features: Minimum roof decking sheet thickness 24 gauge Maximum trapeze width 2" (50 mm) 1/4" or 3/8" square section nut or 3/8" (10 mm) clearance hole Box of 50

The new clips are made from galvanized steel instead of spring steel which expands the use to more applications. Features: Accepts wider strap widths up to 1-1/4" Improved Galvanized and Plated Components for more demanding environments Box of 100

The Speed Link quickly installs as a stand-alone hanging system without drilling into the building structure. Features: Reduces installation time Works with a variety of Erico Fasteners Features galvanized steel construction for superior fire resistant performance Reduces inventory, storage space and shipping costs Increases...