Chatsworth Grounding & Bonding Solutions
-
These brackets mount to the back of the rack channel to provide a convenient point to tie-down cable runs. Features: Colors: Gray, White, Clear & Black High strength aluminum Either end of type B bracket can be attached to rack, allowing cabling to run...
- From $14.66
- From $14.66
- Unit price
- per
-
Clear
-
Gray
-
Black
-
19", 23" and 25" rack base insulator kit electrically isolates the rack from the floor for and effective grounding and bonding system. Features: Made of phenolic insulating material .062 inches thick Accepts up to 1/2" diameter screw Each kit consists of: 2 each isolation...
- From $89.79
- From $89.79
- Unit price
- per
-
Provides electrical continuity from rack to rack. Constructed of 3/16"(thick) x 3/4"(high) hard-drawn electrolytic tough pitch 110 alloy copper bar with eight #6-32 tapped lug mounting holes on 1" centers and two pairs of 5/16" diameter holes spaced 5-8" apart for attaching ground jumpers....
- From $64.90
- From $64.90
- Unit price
- per
-
Provides a convenient way to attach ground wires to racks or cabinets using (1) #12-24 screw (not included). Holds up to (2) #4 gauge wires. Features: Zinc plated UL Listed One hole block
- From $16.61
- From $16.61
- Unit price
- per
-
Insulated ground bus mounting plates specifically designed for commercial applications. The Hard-Drawn Electrolytic Tough Pitch 110 Alloy solid copper ground bars are 1/4" thick and stand off 2.75" from the backboard or wall. The 10" Busbar accepts 1/4" single bolt lugs. The 20" Busbar...
- From $131.89
- From $131.89
- Unit price
- per
-
The new 13622-010 CPI Telecommunications Grounding Busbar (TGB) provides a central ground attachment point for telecommunications systems and other equipment. Features: Hole spacing on busbars accommodates two lug attachment required by TIA/EIA-607 Insulator electrically insulates copper grounding busbar Kit consists of: 1 each grounding...
- From $103.93
- From $103.93
- Unit price
- per
-
#12-24 combination pan head, pilot point mounting screws attach equipment to racks and cabinets. Available in packages of 50ea or 1,000ea. A cutting notch in the thread removes paint in threaded holes to improve metal-to-metal contact. The pilot point reduces cross-threading. The combination head...
- From $16.49
- From $16.49
- Unit price
- per
-
Mounts to the back of the rack channel to provide a convenient tie-down point for grounding and bonding cable runs. Either end of the nylon bracket can be attached to the rack or cabinet face, allowing cable run in several different ways. Features: 1"...
- From $18.12
- From $18.12
- Unit price
- per
-
Electrically isolates cable runway sections, isolating grounded sections of runway or where strong EMI/RFI fields could generate eddy-currents, which could disturb down-line equipment. Features: Made of strong non-conductive material Kit consists of: 2 each isolator bars 2 each butt-splice kits (P/N 11301-001)
- From $29.82
- From $29.82
- Unit price
- per
-
Ground Jumpers provide common grounding from equipment rack or cabinet to halo conductor. Can be used with CPI "L" Brackets (model number: 10001-001 or 10559-500) to attach cable run vertically along equipment rack or cabinet. Ground jumpers are constructed of a 9' long #6...
- From $31.98
- From $31.98
- Unit price
- per
-
Standalone insulator assembly for busbars. Features: Ships preassembled Pair of assemblies consists of: 2 stainless steel bolts, 3/8"(W) x 5/8"(L) 4 lock washers, 3/8" 4 flat washers, 3/8" 2 stainless steel bolts, 3/8"(W) x 3/4"(L) 2 insulators, 3/8"(W) x 1-1/2"(L) 2 stainless steel wall...
- $71.00
- $71.00
- Unit price
- per
-
The Telecommunications Main Grounding Busbar (TMGB) provides a central ground attachment point for telecommunications bonding backbones, equipment and the building's ground electrode system. Features: Mounting brackets are manufactured from high-quality 300 series stainless steel Mounting holes are 3/8" diameter spaced 5.75" apart Busbars mount...
- From $157.63
- From $157.63
- Unit price
- per
-
Busbar Assemblies With Lug Kits contains the Chatsworth Telecommunications Grounding Busbar (TGB) or Telecommunications Main Grounding Busbar (TMGB) along with required stainless steel hardware to fasten the two-hole ground lugs to the Busbar. Features: #6 lugs are 2-hole lugs with 1/4" hardware #2, 2/0...
- From $257.34
- From $257.34
- Unit price
- per
-
Vertical Rack Busbar Kits isolate the Busbar from the rack to help control current paths from passing through one piece of equipment to another. Features: Kits include: 1 #2 AWG two-hole ground compression lug with 3/8" holes on 1" centers 3 white Delrin insulator...
- From $97.19
- From $97.19
- Unit price
- per
-
Rack Busbar Insulator Blocks provide rigid support to physically separate Rack Busbars from all sources of electrical energy. Its offset design securely attaches the Busbar using a #12 self-tapping screw while allowing unobstructed access to rack-mounted equipment. The Insulator Block has a #12 clearance...
- From $8.47
- From $8.47
- Unit price
- per
-
Cable Runway Ground Strap Kits provide a ground pathway between cable runway lengths when fastened together across splices. Installation requires drilling 5/16" holes. Ground Straps consist of an 8"-long #6 AWG green insulated stranded copper conductor attached at both ends to two-hole compression lugs...
- $50.52
- $50.52
- Unit price
- per
-
Chatsworth's Two Mounting Hole Ground Terminal Block provides a convenient way to attach ground wires to racks or cabinets and meets BICSI and ANSI/EIA/TIA two-hole mounting recommendations. Constructed of extruded, high-strength aluminum and accepts conductors ranging from #14 AWG through 2/0. Includes two #3/8-24...
- From $13.29
- From $13.29
- Unit price
- per
-
Recommended for all copper-to-copper connections, copper threads and all mechanical/pressure type grounding connections. Features: Oxide inhibiting joint compound is used to improve the electrical conductivity and enhance the integrity of any grounding or bonding connection Good for all voltages Assures a high-connectivity joint by...
- From $5.97
- From $5.97
- Unit price
- per
-
Mechanical Compression Tools are used to attach compression lugs and butt splices (not recommended for use with C-Tap connections). The tool feature long steel handles with comfortable rubber grips. The Dieless Compression Tool works with either copper or aluminum conductors.
- $549.88
- $549.88
- Unit price
- per
-
C-Type Compression Taps connect two copper conductors with the use of a hydraulic crimping tool. Features: Available individually or in bulk packages UL Listed
- From $6.41
- From $6.41
- Unit price
- per
