Legrand/Wiremold® 6000 Series Large Two-Piece Steel Raceway
-
6000® Series Panel Connector is designed to connect 6000® Series with surface type panel boxes. It Accommodates maximum wire capacity of 6000 system. Separate C-flange fits around raceway, covering uneven cuts to the box.
- $23.00
- $23.00
- Unit price
- per
-
Ivory
-
Gray
-
4000® and 6000® Series Raceway C-Hanger is designed for suspending 4000 or 6000 Raceways from structural ceiling. C-Hanger Features: For use with 3/8" Rod Hangers should be installed no more than 5' apart along raceway run Can be bolted back-to-back for dual runs of...
- $20.36
- $20.36
- Unit price
- per
-
6000® Series Raceway Base. Raceway Features: Galvanized Steel: .054" Available Colors: Gray and Ivory Available in 10' Lengths Sold in Packages of 2 and 4 Bases
- From $184.69
- From $184.69
- Unit price
- per
-
Ivory
-
Gray
-
6000® Series Base Coupling is designed to join lengths of 6000B together. Coupling Features: Dimensions: 3-5/16 H x 2-1/2" W Each Package contains 2 Couplings (Pair) Sold in Packages of 5 Pair Couplings (10 Total Pieces)
- $40.59
- $40.59
- Unit price
- per
-
6000® Series 5' Raceway Cover. Minimum Ordering Specifics:Single and Package of 2 Ordering Quantity is only Available if 'In Stock'. Please call for updated Inventory Status. 'Package of 4' can always be Ordered. Raceway Cover Features: Cover is made with 0.040" Galvanized Steel Available...
- From $59.91
- From $59.91
- Unit price
- per
-
Gray
-
Ivory
-
6000® Series Raceway Combination Flat Elbow is designed for use as a flat elbow. Can also be used as a tee or cross.
- $48.32
- $48.32
- Unit price
- per
-
6000® Series Raceway Blank End Fitting is designed for closing open end of 6000 Series Raceway.
- $21.32
- $21.32
- Unit price
- per
-
Ivory
-
Gray
-
6000® Series Raceway Divider is made of .040" Galvanized Steel. Minimum Ordering Specifics:'Single' and 'Package of 2' Ordering Quantity is only Available if 'In Stock'. Please call for updated Inventory Status. 'Package of 4' can always be Ordered. Divider Features: One side painted buff...
- From $28.38
- From $28.38
- Unit price
- per
-
6000® Series Raceway Converter Coupling converts G6011TX or G6017TX into a tee or cross.
- From $15.32
- From $15.32
- Unit price
- per
-
6000® Series Raceway Base Cutter is a portable cutter for 6000 series base. It provides clean and easy square cuts.
- $725.48
- $725.48
- Unit price
- per
-
6000® Series Raceway Cover Cutter is a portable cutter for 4000 and 6000 series raceway cover. It provides clean and easy square cuts.
- $771.59
- $771.59
- Unit price
- per
-
S4000®, 4000®, and 6000® Series Raceway C-Hanger suspends S4000®, 4000®, and 6000® Series Raceway from a structural ceiling. Features: Designed for use with 3/8" (9.5mm) rod Hangers should be installed no more than 5' (1.5m) apart along raceway run Can be bolted back-to-back for...
- $50.97
- $50.97
- Unit price
- per
-
For use as internal or external elbow, straight-through fitting, tee, or cross (one G6001TX required for tee or straight through fitting; two for cross; not included).
- $51.08
- $51.08
- Unit price
- per
-
Gray Baked Enamel
-
Ivory ScuffCoat
-
For holding G6000DA Divider in place to divide raceway into 1/3, 1/2, or 2/3 compartments. 6000 Raceway divided into 1/3 compartments will not accept devices.
- From $7.28
- From $7.28
- Unit price
- per
-
For vertical mounting single-gang devices on undivided raceway. Accepts commercially available wall plate (sold separately).
- $15.64
- $15.64
- Unit price
- per
-
Ivory
-
Gray
-
Use with commercially available two-gang flush plate (sold separately). Works with 6000 and 4000 series raceway systems.
- From $16.28
- From $16.28
- Unit price
- per
-
Gray
-
Ivory
