Panduit® FiberRunner Routing System

6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary. FiberRunner Coupler Features: RoHS compliant Material: ABS System Size: 6x4 CE Marking:...

Spill-Over Junction with 2x2 Exit allows for safe transition from horizontal to vertical runs. Transition to channel, slotted channel, and corrugated loom tubing. Junction Features: 2" Bend Radius Control Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channel, spilling over the side into a...

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Bracket Features: Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder...

4x4 FiberRunner Channel. The FiberRunner 4x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipment racks within a telecommunications room or service provider facility. Features: Robust...

The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. Features: Minimum 2" bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split covers snap...

The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipment racks within a telecommunications room or service provider facility. Hinged Cover Features: Robust, large...

The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. Features: Minimum 2" bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split covers snap...

Attaches to 6x4 channel and/or fittings to create a 45 deg. downward angle from a straight horizontal run. Used with inside vertical 45 deg. angle fitting FRIV456X4YL to change level of a straight horizontal run. Accepts optional split cover FROV45SC6YL. Features: Minimum 2 inch...

Attaches to 4x4 channel and/or fitting to create a 90 deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC4YL. Features: Minimum 2 bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split...

Attaches to 6x4 channel and/or fittings to create a 90deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC6YL. Features: Minimum 2" bend radius control fittings Protects against signal loss and performance degradation Fittings assemble using FRBC couplers Optional split covers...

Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a FiberRunner® Spill-Over FRSPYL or from 2x2 Fiber-Duct™ Channel. Features: Spill-overs allow safe transition from horizontal to vertical runs 2" bend radius control Transition to channel, slotted channel and...

Fiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation. Features: Fittings include 5/16" assembly holes for fast mechanical fastening Use with NR2WH-L or NR4BL-L Snap Rivets

Panduit FRHD2KTYL provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Attaches to 2x2 vertical tee exit or spill-over junction with a 2x2 exit. Also attaches directly to 4x4 or 6x4 vertical tee exits...

Assembled into the vertical tee 6x4 system spillouts or 4x4 vertical tee with an audible snap, the low profile reducer 4x4 to 2x2 for vertical tee allows for the transition to 2x2 Fiber or 2x2 fiber channel with minimal space required. No tools required...

Vertical Tee is designed to attach to a 2x2 channel and creates a 90 degree vertical drop from a horizontal run. Vertical Tee Features: Hinged door included Accepts channel cover in conjunction with channel Use QuikLock Coupler FBC2X2YL with HS2X2YL6 or H2X2YL6 channels RoHS...

2x2 End Cap Fitting is used for closing off open ends of the hinged channel or fittings. End Cap Fitting Features: Bend radius control to prevent excessive bends in high performance copper and fiber optic cabling Minimum 2" bend radius control fittings Protects against...

FiberRunner 4x4 Snap-On Hinged Cover is part of the FiberRunner 4x4 Routing System. Designed to segregate, route, and protect fiber optic and high performance copper cabling runs to and between equipment racks within a data center, telecommunications room, or service provider facility. Hinged Cover...

FR1.5IDEBL is a 1-Port Spill Out Side Exit to 1.5 Inches Inside Diameter Corrugated Tubing. Features: Spill-overs allow safe transition from horizontal to vertical runs Transition to channel, slotted channel, and corrugated loom tubing Securely holds split corrugated tubing to ensure system integrity 2"...

2x2 QuikLock Coupler quickly joins two sections of hinged channel and/or fittings. Features: Pre-assembled to provide fast mechanical assembly of components No tools required for installation; bolts loosen for component dis assembly Made of ABS RoHS compliant

Strut Clip Kit allows fiberrunner channel to be attached directly to standard 1 5/8" wide strut structures. Features: Comes with two clips and all hardware for assembly Made of steel RoHS compliant